The Subject Of The Contract Is The Purchase And Delivery Of A Used Backhoe Loader. A Technical Characteristics:- Year Of Production Not Older Than 2020,- Backhoe Loader That Meets The Requirements Of The Vehicle Allowed To Travel On Public Roads In Accordance With The Applicable Provisions Of The Road Traffic Law,- Operational Mass Of The Machine Maximum 8500 Kg,- Transport Length Of The Machine Up To 6.0 M, Turbocharged Turbocharged With A Gross Power Of A Minimum Of 90 Hp, Without Dpf Solid Particles Filter, Meeting The Tier4f Exhaust Emission Standard,- Backhoe Load-Beaten Drive For Two Axles, The Possibility Of One Axle Drive,- Driving Wheels: Front And Rear Rear Equal To A Minimum Of 24 ,- In The Machine Mounted New Tires -2025 Swivel, Front And Rear Torsion Wheels,- Minimum Two Suspension Modes- Front Torsion Axle, Both Torsion Axles,- Back-Back-Lock Diameter Without A Brake Up To 10 M,- Gearbox Manual Machine Or Semi-Automatic Switching Under Load, Minimum Four Gears Ahead, Minimum Four Gears, 2 Independent Braking Systems,- 2 Independent Braking Systems, Basic Brake Hydraulic, Wet, Self-Regulating,- A Hydraulic System Enabling Adapting The Performance Of The Hydraulic System To Current Demand,- Hydraulic Installation For Hammer Service Installed On The Backyard Shoulder,- Hydraulic System Powered By A Multi-Base Pump With A Minimum Capacity Of 160 Liters/Min And Working Pressure Minimum 250Bar,- Rear Stabilizers Independent, Hydraulically Retractable,- Fenders Of Front And Rear Wheels, Toolbox, Immobiliser,- Operator Cabin With A Rotating Armchair, Meeting The Requirements Of The Protective Construction Of Rops And Fops, Noise Level In The Cabin To 74Db,- Fuel Tank With A Minimum Capacity Of 150 Liters, B) Charging Equipment. Backhoe Loader: - Must Have A System That Ensures Self -Leveling Of The Charger Spoon And The Stabilization System Of The Charger Spoon, - Must Have The Return Of The Charging Spoon To The Charging Position, - Charger Spoon, Divided (Opening), Multifunctional: 6 In 1 - The Possibility Of Pushing, Charging, Digging, Griping, Spreading And Leveling, Charger Spoon,- Capacity Of A Tablespoon Of Charger At Least 1.0 M³, Width Of The Spoon Up To 2.4 M,- Maximum Loading Height At Least 3.0 M,- Lifting Capacity For Full Height In A Loader Spoon Of Minimum 4,000 Kg, C) Excavator Accessories. Substantial Excavator. Backhoemeal Backhoemeal,- Excavator Spoon 600 Mm Wide ± 20 Mm Mounted On A High-Reloculated Roller Coupling,- 900Mm Width ± 20 Mm Width Mounted On A High-Relocable Backhoe Hydraulically (Telescopic),- Digging Depth At Least 5.80 M,- Loading Height At A Folded Shoulder (Without Telescopic Sliding), At Least 3.5 M,- Lifting Capacity At A Folded Shoulder (Without Telescopic Sliding) At Least 1500 Kg,- Cutting Force On A Background Spoon Minimum 55 Kn, D) Other Obligations:- Warranty The Backhoe Loader Must Be At Least 1 Month Or 200 Hours Of Work Depending On What Will Happen Before,- A Full Service Review Must Be Carr
