Adapted Van For Mobile Dental Unit With Minimum Specifications: 100 Hp Power; 2,000 Cc Displacement; Electronic Injection; 70 L Min 70 Fuel Tank; Tachometer; 1,800 Mm Internal Height In The Service Room, With No Lower Volumetric Capacity 10M3; Sliding Side Door; Two Rear Doors; Electric Center Consisting Of Thermal And Automatic Circuit Breaker, Releal, Fuse Base Installed At The Bottom Rear Of The Cabinet; Internal Electric Panel On The Bench, 110 ~ 127Vca Integr Ruler; Lighting And Ventilation Switches Of The Hall; External Output (Tri Polar) For Capture Of Power Installed At The Electrical Center At The Rear Of The Vehicle With Access By The Plug Back Door, At Least 20 Meters Long; Automatic Transformer Connected To The Uptake, Which Allows The Car To Be Connected To An Electrical Network Of Both 110 And 220 Vca, Which Always Provides 110 Inmates, Lamps, Dental And Electrical Equipment Inside The Vehicle And 220 Vca For The Split Air Conditioning; Vehicle Service Compartment Lighting Should Be Of Two Types: Natural Supplied By The Vehicle Windows (Cabin And Body), With Opaque Or Blasting Glasses In Its Lower 2/3 In The Service And Artificial Compartment Should Be Made By At Least Seven Luminaires, Installed On The Ceiling, Being Six 110 Vca And An Emergency 12 Vcc, With A Minimum Diameter Of 200 Mm, On A Base -Print Base Or Plastic Injected, White In Led Model. Dental Equipment That Should Accompany The Mobile Dental Unit: Dental Compressor (Min 38 L) With Hand Parts System Composed Of High Rotation, Against Straight Part. Dental Office Composed Of: Dental Chair; Dental Equipal Coupled With Articulated Arm, With Four Terminals Being 1 P/ M Engine With Spray (Borden Type), 2 P/ High Spray Rotation (Borden Type) And 1 Triple Syringe; Dental Reflector (Min 8,000 Lux).
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
