Tenders Are Invited For Delivery And Installation Of Equipment Of An Existing Tubular Well Tc - Bozhurishte, In Property 05027.601.1156, Bozhurishte And Construction Of A Fence

The Subject Of This Public Procurement Is The Delivery And Installation Of Pumping Equipment, Which Should Be Installed In An Existing Pipe Well In Property 05027.601.1156 And Construction Of A Fence With A Door Around The Facility. The Facility Data: The Facility Was Built In 1985, Located On A Landed Property Is The Identifier № 05027.601.1156 In Bozhurishte, Bozhurishte Municipality. The Water Intake Facility Is A Pipe Well With A Depth Of 95.5M Construction Of The Pipe Well: Drilling Of 0.00-8.00M With A Diameter Of 600Mm; Drilling Of 0.8-120,00M With A Diameter Of 500Mm; Lowering Of A Metal Column With A Diameter Of 500Mm From 0.00-8.00M Behind The Trablistically Cemented; Operating Filter Eternity Column With A Diameter Of 300 Mm. From 0.00-95.5 M. Filter Sections: 17,0-32.0 M., From 44.0-52.0 M And From 68.0-84.0M Representing Vertical Slots. Behind The Tube Space Is Filled With Gravium. The Interval Below 95.5M Is Tamponed. At Present, The Facility Is Not Equipped For Operational Purposes. The Service Will Be Used For The Purpose Of Public Drinking And Domestic Water Supply Of Bozhurishte, Bozhurishte Municipality, Uic 000776071. Facility Coordinates: Wgs84 N -42O 45`44.86`, E - 23 O 11`41.98`` Terrain: 557.97M Shn = 2M. Equipment Required: For The Normal Operation Of The Facility, The Same Should Be Equipped With The Necessary Pumps, Incl. To Build A Fence With A Neck. It Is Envisaged To Build A 40M -Length Fence On The Ring Of The Well And The Installation Of The Neck. The Fence Should Be Installed With The Help Of Stakes And A Wire Mesh With A Height Of 2M And The Door Should Be With A Metal Frame, Mesh And Padlock. Wire Diameter 1.4/2.6 Mm (1.4 Mm Steel Thread; 2.6 Mm Including Pvc Coating). Network Raster: 60 X 60 Mm. The Necessary Equipment For The Well Well, Which Should Be Delivered And Installed Within The Public Procurement Is As Follows: 6 Submersible Drilling Pump 36Si / 14 * Stainless Steel Aisi 304, 6 15Kw Engine On Water Based 40M3 / H, 97M-1,00 Pcs. Teperter Sme For 6 Engine-1.00 Pcs. Aisi 304 3 Organifed Steel Pipe, 88,9X3mm, With Reinforced Thickened Thread, Locking Mechanism And Welds Of The Patches By Friction For Higher Corrosion Resistance Of 6M Each-14.00Pcs. Siege Pipe For A 6 Submersible Engine For Forced Cooling-1.00 Pcs. Hydrostatic Sensor For Level 0-100M And Cable 100M With Process Indicator For Reading Level-1.00Pcs. Pump And Engine Bolts-1,00 Pcs. H07 Cable Rubberized 4X10mm2- 100.00M. Inverter Control And Protection Board, Pressure Sensor And Maintenance Of Constant Pressure According To The Set, Overload Protection, Dry Stroke And More. Forced Cooling And Heating, Sinusoidal Filter -1,00 Pcs. Sinusoid Filter 38A-1,0 Sensory Control Cable Level 3X0,75 0.3/0.5Kv-100,00 Pcs. Level Sensors-3.00Pcs. Water Meter, For Cold Dn80 Certified And Approved For Operation-1,00 Pcs. Electromfe-1.00Pcs. The Full Description Of The Subject Of The Public Procurement Is Given In The Relevant Technical Specification - Applications # 1, Representing An Integral Part Of This Documentation.