3/4 Volumetric Hydrometer - R400 Technical Specifications - Volumetric Meter Qmax = 3, 125 Nominal Diameter 20 Mm (3/4); Length 115Mm; Maximum Flow (Q4) 3, 125 M3/H; Nominal Flow (Q3) 2, 5 M3/H; Transition Flow (Q2) 10, 0 L/H; Minimum Flow (Q1) 6, 25 L/H; Starting Flow Between 01 To 02 L/H; Minimum Range (Q3/Q1) 400; R400 Metrological Class (H/V); Maximum Working Temperature 50ºc; Maximum Working Pressure 10 Or 16 Bar (1, 0/1, 6 Mpa); Type Of Magnetic Transmission; Magnetic Shield Class Iii; Metal Housing, With Blue Epoxy Paint Or Composite; Tempered Glass Dome, Ip68 Protection; Copper And/Or Polycarbonate Base; Dry Watch, 360º Swivel, Inclined (Enabling Reading At 45º); Totalization System 9,999, 99 M3; Minimum Totalizing Resolution 0, 02 L; No Connections; Closing Ring Hide At Least 2, 5 Cm Wide; Maximum Load Loss Up To 1, 0 Bar (0, 1 Mpa); Minimum Idm 95%; Inmetro Approval, According To The Notice., Unijato Q3 2, 5 M³/H X ¾ - R125: Unijato Q3 2, 5 M³/H X ¾ With Magnetic Shielding Class Ii, Nominal Diameter 20 Mm (¾), Maximum Flow (Q4) Of 3, 125 M³/H, Permanent Flow (Q3) Of 2, 5 M/H, Transition Flow (Q2) Of 32 L/H, Minimum Flow Rate (Q1) Of 20 L/H, Measurement Range Q3/Q1 Equal To 125 (R125), Metrological Class B, Length 115 Mm, Maximum Working Pressure Of 10 Bar (1, 0 Mpa), Maximum Working Temperature Of 50 ° C, Transmission Against Fraud, Copper Alloy Housing And Glass Or Polycarbonate High Resistance (Ip68), Dried, Swivel, Inclined (45 °), Totalization With A Minimum Capacity Of 9,999 M³ And Minimum Resolution Of 0, 02 Liters, Bsp Threaded Connections (Nbr 8194), Approved By Inmetro (Ordinance No. 155/2022), Unijato Body Body, Dn 20Mm (¾) 115 Mm Long - Q4 3, 125 M³/H -Q3 2, 5 M³/H - Q2 50 L/H - Q1 31, 25 L/H, Operating Start Of 11 L/H - With High Resistance Polycarbonate 45 ° And Revolving 360 ° With Stop And Metallic Strawless Stainless Steel Stainless Steel Axis, Internal Plastic Steel Axle Engineering, With Maximum Operating Temperature Of 50ºc And Service Pressure Of 1, 0 Mpa, With Approval In The Ordinance Of Inmetro 155: 2022. Similar Instrument And Compatible With Class B Hydrometer, Maximum Flow 3 M3/H, Nominal Flow Of 1, 5 M3/H, 120 L/H Transition Flow And Minimum Flow Rate Of 30 L/H And Typical Operating Start Of 11 L/H, Multijato Dn 25 (1), Q3 10 M³/H, Housing With Blue Epoxy Paint, Polycarbon Or Glass Flat Drought Ip68, Connections With Nuts And Washers, Multijato Dn 40 (1½), Q3 16 M³/H, Connections With Nuts And Tubes, 11/07/2025, Woltmann Dn 50 (2), Qmax 30 M³/H, Blue Epoxy Carcass, Magnetic Epoxy Carcass Woltmann Dn 65 (2½), Q 25 M³/H, Qmax 50 M³/H, Pulseless Mechanical Transmission, Woltmann Dn 100 (4), Q 50 M³/H, Qmax 100 M³/H, Mechanical Transmission, Ultrasonic Hydrometer Dn 25 (1), Composite Housing, Ip68 Tempered Glass, Digital Display Lcd, Liter/Pulse Transmission, According To Notice, Ultrasonic Hydrometer Dn 40 (1½)
