1. The Subject Of The Contract Is The Development Of Project Documentation For The Construction Of Owsiana Street In Bielsk Podlaski. 2. The Scope Of The Order Includes: 1) Construction Of The Surface: Roadway, Conventions, Pedestrian Pavements, 2) Vertical And Horizontal Marking Of The Whole Range, 3), If Necessary-Reconstruction Of The Existing Technical Infrastructure, Interfering With The Designed Elements Of The Road Lane, 4) Construction Of A Rainwater Sewage System For Dehydration Of Hardened Surfaces, 5) Execution Of Water Connections. To The Boundaries Of Real Estate Within The Road Lane, 6) Execution Of Water Connections. - Can. To The Newly Marked Boundaries Of Real Estate Within The Road Lane (Widening The Road Lane), 7) Execution Of The Exits Of Water Supply And Sewage Networks To Plots Constituting Private Roads, 8) Construction Of A Street Lighting Network In The Entire Range, Taking Into Account The Lighting Of Pedestrian Crossings, Taking Into Account The Following Entries: 9) Design In Accordance With The Guidelines For The Construction Of Power Equipment Sep-E-004: 2004, Pn-En 13201.10) Design In Accordance With Pge Dystrybucja, Energy Region Bielsk Podlaski, 11) Predict The Use Of Aluminum Street Lighting Poles, Gray Anodized (Ci-63) With Additional Protection Of The Elestomer Base, 12) Predict The Design Of The Led Control And Led Control Cabinet. Soft Start - 3 Pcs, Network Analyzer, Type S Protection, Controller With Gps/Gsm Antenna Compatible With Cpanet, Automatic Passive Power Compensators - (The Wardrobe Should Work With The Existing In The City Of Bielsk Podlasie The System Of Control And Management Of Led Street Lighting), 13) Predict The Use Of Newly Launched Leds, Which Should: A) Before Entering The Dust And Water Not Less Than Ip 66 For The Optical Part And The Supply System, B) Have A Body Made Of Aluminum Alloy Anodized In Gray (Ci-63), C) Have Elements Attaching The Luminaire On The Pole, Boom (Screws, Pads) Made Of Stainless Steel And Guaranteeing Stable Installation, D). Leds With A 4000K +/- 200K Light Color And With A Color Rendering Indicator Ra Min. 70, E) To Be Equipped With A Group Of Lenses Shaping By Sending Road Lights; Each Diode On The Led Panel Should Have An Individual Optical Element With The Same Characteristics, So That In The Event Of Burn Out One Of The Diodes Only A Light Stream Emitted By The Binding Changes And Does Not Send Its Light (Not Its Light (Should Be Maintained Evenly Lighting On The Entire Surface Of The Illuminated Road), F) Made In The Second Class Of Protection, G) Have A Photo Class Min. 1, H) Power Factor> 0.95, I) Operating Temperature Range: -400C ≥ Is ≥ 400, J) Disruption Of The Thd Network Thd <20%, K) Have Programmable In Two Compartments, An Autonomous Time Relay, Which Allows You To Reduce The Lighting Of The Light Stream Min. In Two Different Levels; The Autonomous Power Reduction System Should Be Able To Reprogram Using The Controller From The Energy Cabinet, Clos
