The Subject Of The Order Is The Delivery Of The Doppstadt Dw 3060 1 Used Shredder. Year Of Production Is Not Older Than 2014 2. Maximum Number Of Hours Worked. Not More Than 5000 Hours. 3. The Device May Not Be A Prototype, It Must Come From Serial Production, 4. The Device Is Built On A Wheeled Chassis At Least Three, 5. Adapted To Connect With A Tractor Using A 50 Mm Cruising Hook, 6. Equipped With A Braking System With The Abs System And Road Lighting, 7. Equipment With A Ball Hook At The End Of The Diagonal, For Example, To Drag The Machine With A Charger. 8. Total Mass Of Ready -To -Work Device (Dmc): Max. 26 Mg. 9. A Device Equipped With A Diesel Engine With A Power Of Min. 310 Kw 10. Fuel Tank: Min. 500 Liters 11. Crilling Chamber: A) Equipped With One Crushing Embankment And At Least One Crushing Comb, B) Loading Height: Max. 3000 Mm, C) Loading Width: Min. 3900 Mm, D) Method Of Crushing Material: Shaft - Comb, E) Shaft And From A Comb Located Along The Machine Axis, F) Crushing Shaft: Length: Min. 3,000 Mm, Diameter: Min. 600 Mm G) Machine Control Equipped With A Shaft Reverse, H) Equipped With New, Replaceable Crushing Knives, I) The Number Of Knives On The Shaft: Min. 20 Pieces J) Knives Mounted In A Machine Adapted To Crush Large -Size Waste 12. Crunning Comb: A) Length: Min. 3000 Mm B) Lowered And Hydraulically Lifted C) Number Of Combement Elements: Min 20 Pieces D) Combine Elements With The Possibility Of Their Regeneration, 13. Transfer Of The Drive To The Shaft Using A Gear With A Gear With Overload Protection 14. A Set Of Indicators Containing At Least: A) Fuel Condition, B) Number Of Hours Worked From The Beginning Of Operation, C) Number Of Hours A Day, C) D) Engine Crankshaft Rotation Speed, 15. Machine Equipped With Fiction Output After Crushing: Lower And Rear, A) The Bottom Conveyor Located Under The Crushing Shaft B) Tape Length: Min. 3000 Mm, C) The Width Of The Tape: Min. 1000 Mm, D) Non -Acid -Adjustable Feeder Speed, 16. Rear Conveyor: A) Tape Length: Min. 4500 Mm, B) Tape Width: Min. 1100 Mm C) The Feeder Speed Of The Non -Acne, D) Hydraulically Folded And Fold -Out Rear Conveyor, 17. The Machine With The Rear Conveyor Is To Be An Independent System Of External Power Sources. 18. The Contracting Authority Requires That The Machine Be After A Major Renovation: A) The Machine After Sandblasting And Painted In The Original Color Of The Manufacturer B) All Bearings, Rollers, Hydraulic Hoses, Knives, Anti -Algae, Oils, Filters, Tapes, C) New Or After A Major Renovation 19. Driving In A Way That Allows Free Access To Service Points. 20. Machine Equipped With: A) Remote Control Pilotmbe) Hydraulic Self -Control21. Required Documents And Certificates To Be Provided With The Device: A) Ce Compliance Certificate, B) Dtr Device Manual,
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
