Tenders Are Invited For Murowy Works Involving The Repair Of Chimney Cables According To The Needs Of The Management Board Of Municipal Buildings In Elbląg.

2) The Subject Of The Contract Includes The Implementation Of Works In Accordance With The Framework Scope Specified In The Template Of The Contract Constituting Annex 9 To Swz, In Particular: 2.1 Czekuration Of Chimneys With Accompanying Works, Including The Transmission Of Ceramic Tile - A Sloping Roof. 2.2 Running Chimneys With Accompanying Works, Including Local Repair Of Roofing Roofing - Flat Roof. Vertical Air Outlet, Base On Ventilation Ducts Mounted On A Chimney Hat With Sealing Of The Place Of Assembly And Cleaning Of The Chimney Outlet. 2.4 Installation Of Roof Launchers, Chimney Caps Of Two -Chamber Insulated To Extend The Smoke Chimney Flue, Mounted On A Chimney Cap In A Cable Without Reducing The Duct Cross -Section, Along With The Purification Of The Duct. Chimney. 2.5 Installation Of The Insert In The Smoke Chimney Duct, Systemic Insert Of Acid-Gray-Resistant Sheet 0.8 Mm Thick. In The Scope Of Work, A Set Of System Fittings Should Include The Connection Of The Heating Device / Flinch, A Toilet Pipe / To The Chimney Insert. Milling The Inner Surface Of The Cable To Obtain A Cross -Section Enabling The Installation Of A Normative Chimney Insert. Checking Patency Of Chimney Camera. 2.6 Installation Of The Chimney Louffold In The Ventilation Or Combustion Canal With A Circumference Of 60-90 Cm, Installation Of The Stiffening Spring With Acid-Resistant Wire, Checking Patency With A Chimney Camera. The Work Is Included In The Set Of System Fittings, Connecting The Indicated Device To The Cable, Cleaning The Chimney Flue Before Installing The Insert. 2.7 Sealing The Chimney Flue By Three Times The Carboning With The Sealing Mass For Chimney Flues - Smoke, Ventilation And Flue Gas With Dimensions Of 14 X 14 Cm Cables, Connecting The Indicated Device To The Sealed Cable With The Inlet Purification. Cleaning The Chimney Flue Along With The Replacement Of The Cleaning Doors, Checking The Patency With A Chimney Camera, Forging From The Wall Of Ventilation Grilles, Doors And Putting Them In Brick Walls.