Notice Of Price Registration Intention, Intended Exclusively To The Public Administration Bodies Not Part Of The City Hall Of Campo Grande -Ms (Art. 86, Of Federal Law No. 14,133/2021 C/C Art. 9, §1º, Of Municipal Decree No. 15.582/2023) - Price Registration For Eventual Acquisition Of Securities In General
Notice Of Price Registration Intention, Intended Exclusively To The Public Administration Bodies Not Part Of The City Hall Of Campo Grande -Ms (Art. 86, Of Federal Law No. 14,133/2021 C/C Art. 9, §1º, Of Municipal Decree No. 15.582/2023) - Price Registration For Eventual Acquisition Of Securities In General
Table - Type: Workstation With 2 Drawers; Format: “L”; Measurement: 1600 Mm Long (+/- 50Mm) X 1600 Mm Wide (+/- 50Mm) X 740 Mm High (+/- 5Mm); Top Material: Mdf Wood Or Mdp At Least 18Mm Thick, Throat At The Edges Of At Least 20Mm; Top Finish: Coating On Both Sides In Melamine Laminate, At Least 1Mm Edge Tape In All Its Length; Structure: Carbon Steel; Welding System: Mig; Requirement: Electrostatic Painting In Epoxy-Popo, Hard Pvc Tips, Nylon Leveling Shoes Or Similar, All Metallic Material Should Receive Anti-Ruginous Treatment; Drawer: Two Drawers With Metal Slides, Handles And Keys Lock., Table - Type: Individual Workstation; Measurement: Ask With 1200 (+/- 3Mm) Wide; 700 (+/- 10Mm) Depth; 750 Mm (+/- 10Mm) High; Top Material: In Mdf, With A Minimum Thickness Of 25 Mm; Top Coating: Both Faces With The Same Finishing, Fibers Agglutinated With Thermoset Synthetic Resin, With Massive And Resistant Plain Surface Plate; Top Finish: Containing Ribbons Of At Least 2, 5 Mm Thick And Bushing Bushings; Front Panel: In Mdf/Mdp Of At Least 18Mm Thick Of The Same Top And With A 1Mm Edge Ribbon; Structure: In Metal Plate, Divided Into Paw, Double Column W/ Cable Gutters, And Top Holder, With Plates Fixed By Mig Welding; Fixing: Performed By Internal Hexagon Screws; Containing Adjustable Shoe Articulated With Level Thread; Gutter: Horizontal Center, Positioned Under The Top, On A Carbon Steel Plate, With Clippings For Sockets And Entries For Telephony And Internet; Board Requirement: Fixed To Wood By Term Fuse Adhesive, Applied By The Hot Melting Collage Process, With Milling Finish And Rounding; Complementary Data: Metal Components In Carbon Steel With Epoxy -Polyester Painting Finishing, With A Minimum Thickness Of 40 Microns Applied To The Surface., Table - Type: Workstation For 2 Users; Measurement: 1200 X 1400 X 740 Mm (L X P X A); Top: Mdp Or Mdf With A Minimum Thickness Of 25 Mm; Top Coating: Melamine Laminate On Both Sides; Structure: Feet And Dish In A Minimum Rectangular Tube 50 X 50 Mm Of Carbon Steel; Structure Painting: Powder Electrostatic; Top Finish: Border Ribbons At Least 2, 5 Mm Thick; Gutter: Horizontal Center, With Clippings For Sockets And Entries For Telephony And Internet; Divisor Panel: In Mdf 1100 X 300 X 18 Mm (C X To X E) Same Coating Of The Top And With At Least 2, 5 Mm Edge Ribbon; Complementary Data: Complementary Information To The Reference Term., Table - Type: Oval Meeting; Measurement: 2, 00 X 0, 90 X 0, 74 M (C X L X A) +/- 10Cm; Top Material: Mdf Wood Or Mdp Of At Least 18Mm Thick, At Least 1Mm Edge Tape In All Its Length; Structure: Carbon Steel; Requirement: Electrostatic Painting In Epoxy -Phi, All Metallic Material Should Receive Anti -Ruginous Treatment., Table - Type: Rectangular Meeting; Measurement: Minimum Of 3000 X 1000 X 740 Mm (C X L X A); Top Material: In Mdf Or Mdp With A Minimum Thickness Of 25Mm; Top Finish: 2 Sides In Low Pressure Textured Melamine Laminate, Abs Tape Edges, Or Similar, Hot Glued, With A Minimum Thickness Of 2, 5 Mm For All Sides; Requirement: Central Mdf Or Mdp Panel With Thickness
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
