Irbe. Manometer Of Accurate Measurements Of Mti -U. The Nominal Diameter Of The Case Is 160 Mm. Limits Of The Measured Pressure 0-10 Im. Accuracy Class Not More Than 0.6. The Degree Of Dust Protection Ip 54. Building Material: Steel. The Measuring Part Is A Copper Alloy. The Location Of The Fitting Is Radial. The Thread Of The Fitting M20x1.5. Passport Of The Manufacturer. Primary Verification Certificate. The Year Of Manufacture Was No Earlier Than 2024. Gost 2405-88. Certificates., Irbe. Technical Manometer Mr-4 -U. The Nominal Diameter Of The Case Is 160 Mm. Limits Of The Measured Pressure 0-1.6 Im. Accuracy Class Not More Than 1.5. The Degree Of Dust Protection Ip 54. Building Material: Steel. The Measuring Part Is A Copper Alloy. The Location Of The Fitting Is Radial. The Thread Of The Fitting M20x1.5. Passport Of The Manufacturer. Primary Verification Certificate. The Year Of Manufacture Was No Earlier Than 2024. Gost 2405-88. Certificates., Irbe. The Thermometer Is Kerosene. Type Of Installation: Straight. Temperature Measurement Range: From 0 To 150 ° C. The Length Of The Submersible Part: 66 Mm. Diameter Of The Case: 19 Mm. Accuracy Class: 1.0. Building Material: Glass. The Year Of Manufacture Was No Earlier Than 2024. Gost 28498-90. Certificates., Irbe. Technical Manometer Mr-3, Eco Execution. The Nominal Diameter Of The Case Is 100 Mm. Limits Of The Measured Pressure 0-1 Im. Accuracy Class Not More Than 1.5. The Degree Of Dust Protection Ip 54. Building Material: Steel. The Measuring Part Is A Copper Alloy. The Location Of The Fitting Is Radial. The Thread Of The Fitting M20x1.5. Passport Of The Manufacturer. Primary Verification Certificate. The Year Of Manufacture Was No Earlier Than 2024. Gost 2405-88. Certificates.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.