Sticking Rink. Type Of Pressing Is Automatic. Heating Power Is At Least 9900 Watts. Type Of Heating- Electr. Stress Is Not More Than 380V. The Winding Of The Shaft- Galvanized Springs +Canvas Are Non-Punctured Needle-Proof Heat-Resistant. The Diameter Of The Drum Is Not Less Than 300 Mm, The Heating Power Is At Least 9.9 Kw, The Iron Speed Is From 2 To 5 M/Min. The Heating Temperature Is At Least 100 To 200 ° C. The Width Of The Iron Zone Is Not More Than 1,400Mm. The Coating Of The Ironing Tray Is Anti -Corrosion Anti -Adhesive Chrome. The Power Of The Rolling Electric Motor Is At Least 0.37 Kw, The Power Of The Electric Motor Of The Pressing Mechanism Is Not More Than 0.18 Kw, The Power Of The Electric Motor Of The Fan Mechanism Is At Least 0.18 Kw. Heating Time To A Temperature Of 180 Degrees No More Than 20 Minutes. The Overall Dimensions Are The Length (Depth)- At Least 740Mm, Width Is Not Less Than 1925Mm, At Least The Height Is 1085Mm. The Specific Consumption Of Electricity Is Not More Than 0.33 Kwh/Kg. The Presence Of A Fan For The Suction Of Steam. Delivery, Unloading And Installation At The Expense Of The Supplier. Guarantee 12 Months. Agree With The Customer. Gost 12.2.084-93, Washing Is A Flashing Machine. Sensor Controller Of Washing Programs With An External Carrier. Facing- Stainless Steel. High -Speed Final Excavation, Allows You To Effectively Wash And Squeeze All Types Of Tissues, Without Requiring Additional Use Of Centrifuge. The Pressed Structure Reduces Vibration And Load, And Also Provides A Minimum Noise Level In The Laundry. The Frequency-Regulated Drive Provides Smooth Acceleration And Braking Of The Drum. Connecting To Cold And Hot Water Allows You To Save Electricity And Washing Time. Nonomal Loading Mass Is At Least 25 Kg, The Geometric Volume Of The Inner Drum Diameter Is At Least 250. The Internal Drum Is At Least 820X, At Least 470Mm Depth. The Load Height Is Not More Than 735Mm. Inner And Outer Drum-Stainless Steel. Facing- Stainless Steel. The Type Of Technological Process Is Automatic. The Separation Factor Is When Washing At Least 0.7-0.9, With An Exalgory Of No More Than 350. The Frequency Of Rotation Of The Drum Is Not Less- When Washing 39.1-44.3 Rpm, With Push-Ups Of Not More Than 890 Rpm. The Intended Humidity Is No More Than 50%. The Type Of Heating Is Electric. The Nominal Power Of The Drive Electric Motor-14 Kw, Heating Elements-18 Kw. The Overall Dimensions Are No More Than The Length (Depth) -1080Mm, Shirin-1190Mm, Height-1585Mm. The Specific Consumption Of Electricity Is Not More Than 0.32 Kwh/Kg. The Specific Water Consumption Is Not More Than 17 Dm3/Kg. The Conditional Passage Of The Valve And Hot Water Valves Is Not More Than 25 Mm, The Conditional Passage Of The Washing Of Detergents (Cold Water) Is At Least 20 Mm, The Output Diameter Of The Drain Pipe Is At Least 75 Mm, The Pressure Of Cold And Hot Water-02, -04Mpa, The Voltage Of The Electric Network Is Not More Than 380V, Unloading And Installation At The Expense Of The Supplier. Guarantee 12 Months. Agree With The Customer. Gost 12.2.084-93
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
