Provision Of Cbr- California Bearing Ratio Technical Report Service, For Soil Analysis Purposes Support For The Execution Of Asphalt Paving Projects In Cbuq, With The Following Procedures: 1 -Collection Of Representative Samples Of The Ground At Different Points And Depths -First Layer: 0 To 0, 30 M -0, 30 To 0, 50 M -0, 50 A 1.00 M); 2 - Preparation And Execution Of The Test According To The Relevant Technical Standards - Abnt, Nbr 7180 Or Other Specific Regulations; 3 - Calculation Of Cbr Index, According To The Standards Required; 4 - Preparation Of Complete Technical Report, Containing The Detailed Description Of The Procedure, The Results Obtained, The Critical Analysis Of Soil Conditions And The Interpretation Of Cbr Data; 5 - Indication Of The Minimum And Maximum Cbr; 6 - Issuance Of Art. The Tests Are Standardized According To The Current Brazilian Technical Standards, And Shall Be Performed Exclusively By Specialized Geotechnical Laboratory, Duly Trained And With Adequate Technical Structure. It Is Also Noteworthy That The Scope Of The Laboratory Is Restricted To The Performance And Delivery Of Contracted Laboratory Tests, Not Including, Under Any Circumstances, The Sizing Of The Floor Or The Elaboration Of The Paving Project, Which Remain Under The Sole Responsibility Of The Designer, Which Will Use The Results Obtained As Technical Subsidies For The Proper Sizing Of The Pavement Structure.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
