Tenders Are Invited For Emergency Renovation Of The Roofing Part With Sheet Metal Machining And Roof Drainage Installation Of The Vocational School Complex No. 2 In Krakow

The Subject Of The Contract Is The Execution Of An Emergency Renovation Of The Roofing Along With Sheet Metal Processes And The Roof Drainage Installation Of Vocational School Complex No. 2 In Krakow To Prevent Further Flooding Of The Building And Degradation Of The Substance Of The Monument. As Part Of The Subject Of The Contract, The Contractor Is Obliged To Include To Perform The Following Basic Construction Works: 1) Assembly Of Scaffolding And Protective Roofs, 2) Dismantling The Existing Lightning Protection System (At Collisions On The Time Of Conducting Works), 3) Dismantling Of The Existing Roofing From The Roofing Roofing (Edge ​​Belt Of 1.0 M Wide On The Sections Indicated In The Drawing Attachment - Scope Not Followed In 2024), 4), 4) Disassembles Gutters And Drain Pipes (On The Sections Indicated In The Drawing Attachment - Range Not Completed In 2024), 5) Dismantling Of Old Flashings Of Cornices, Bases Of Attic, Belts Under And Rhythics, And Sink Baskets (On The Sections Indicated In The Drawing Attachment - The Scope Not In 2024), 6) Dismantling Atthyk And Flashings Of Sterczyn (Poles) And The Walls Of The Whole Attic, 7) Forms Of Loose Plasters And Damaged Cornice Bricks, 8) Forms Of All Attic Plasters And Damaged Bricks Of The Helms (Poles) And Attic Walls, 9) Removal Of All Trees Growing Into A Roof Slope/Dehydration/Cornice Installation, 10) Attyk, 11) Anti -Corrosion Protection Of The Steel Beams Of Attic Walls, 12) Grabbing, Assumptions Of The Rabitz Steel Mesh And Making The Liner With Cement Mortar Steel Beams Of The Attic Walls, 13) Supplement The Damaged Fragments Of Brick Cornices And Attic (Brick Thread), 14) Supplementing Wall Plasters In The Niches In Which The Trigger Pipes Are Carried Out, 15) And Repair Of Damaged And Scalded Plasters Of Cornices, 16) Performing New Plasters Of The Whole Attic (Sterczyn And Walls), 17) Renovation Of The Upper Surface Of The Cornices And Attic Walls, Including Their Alignment And Supplementation Of Cavities (Cornices Before The Processing Of Processing, Properly Profile While Maintaining A Decrease From The Building), 18) Performing New Covers And Flashings (Columns). Attyk, 19) Assembly Of Osb Plates For Flashing Of The Cornice, Subrynary Belts And Attic Walls, 20) Execution And Assembly Of New Flashings Of Cornices, Bases Of Attic, Covering Sterczyn And Attic Walls, Belt Belts Under And Rudder, As Well As Sink Baskets, With Sinks, With Galvanized Steel Sheets. Min. 0.7 Mm (Natural Metallic-Died), Connected In Traditional Technique (Combine The Baking Tray On The Seam With The Covered Attachment, Let The Plaster On The Walls Under The Plaster) 21) Assembly Of New Gutters And Drain Pipes Made Of Galvanized Steel Sheet Metal. Min. 0.6 Mm, Wed. 150/150 Mm (Natural Metallic-Died Color), 22) Sealing Trigger Pipes Through Cornices, 23) Perform A New Covering From Thermosal Roofing Roofing Felt And Outer Coverage (Edge ​​Belt With An Additional Plant For Existing Cover, Width Of Approx. 1