Bids Are Invited For Acquisition Of Buckets For Installation In Vehicles Of The City Hall

New Cane -Type Cane -Type Cane Metal With A 12 M³ Capacity - With Internal Dimensions Of 4,650 Mm Long, 2,300 Mm Wide And 1,200 Mm High, Built On Hadox 450 Steel Sheets In The Larger Areas. The Floor Will Be Manufactured In 6 Mm Hadox 450 With 15 ° Side Folds, While The Sides Will Also Be In 4 Mm Hardox 450, With Four Beats Of Folds To 15 ° And Transpass Over The Floor. The Load Box Will Be Equipped With Reinforced Rear Ribs And Upper Lateral Profiles With Length Of 4718 Mm, 200 Mm Section Of Total Height (100+100 Mm), With A Recess Of 62 Mm Lower And 56 Mm, 6, 35 Mm In Astm A36 Steel, As Well As Lower Structural Profiles Of 1468 Mm, Section 120 X 107 Mm And 8 Mm. The Side Lobby Will Be Divided Into Two Parts With Lengths Of 2252 Mm And 2218 Mm, A Total Height Of 479 Mm, 3, 75 Mm Thickness, Fixed By Welded And Screwed Supports In Astm A36 Steel. The Rear Cover Will Be Mobile, Articulated, Built On 4 Mm Hardox 450 Plate With 2434 X 1348 Mm Dimensions, With Section Vertical Booster Profiles, 35 Mm, 35 Mm And 35 Mm Tab, And 45 ° Bent Horizontal Profiles, Based On 216 Mm, And 2054 Mm Length In Astm A36 Steel. The Lid Will Be Fixed By Two Removable Ø34 Mm Pins And 310 Mm Length With Recess For 45 ° Lock And Chamfer, Accompanied By 281 X 139 Mm -Thick -Dimensions And 19 Mm Thickness. The Upper Rotation System Will Feature A 2308 Mm Long Arm, 25, 4 Mm A36 Steel Thickness With Automatic Side Opening By Chassis Connected To The Chassis And Possibility Of Use As A Gravel Spreader, By Removing Pins And Driving By Cuíca Pneumatic Hook And Limiting Current. The Front Of The Bucket Will Consist Of A Lower Panel In 4 Mm Hardox 450 With Dimensions Of 2512 X 1486 Mm And Upper Plate And