(L1) 7101.99086-Am, Type: For Tools, With 2 (Two) Doors And 4 (Four) Shelves, Material: Steel Plate 24, With Epoxy Electrostatic Painting Powder, Color: Gray, Dimension: 1, 95M, Width: 0, 90M, Depth: 0, 40M (Variation Of +/- 10%) And Fixed Feet, Unid. Measurement: Unit, (L1) 6510.25075-Kit, Type: Pressure Transducer, Usage: Invasive Pressure Monitoring, Composed Of 01 Truwavetm Adult Pressure Transducer With Male And Fame Connector And Three Three Way Multidirectional Tap And Flow Regulatory Device (Snap-Tab Tm Type That Allows Continuing Fluid Flow To 3 Ml/H (+/- 1 Ml/H) When Used With Solutions, On Bag Or Bottle, In An Inflated Pressurizer At 300 Mmhg) Coupled To The Electronic Transducer And Connecting To The 35 Cm Invasive Pressure Monitor/Module With External Plastic Protection And Internal Moisture Rubber Ring, Accompanies 01 Simple Macrogoted Serum With Roller And Connector Roller Equation Female, 01 Low Compliance Extension 122 Cm With Male And Female Connector, 01 Low Compliance Extension 30 Cm With Male And Female Connector, 01 Three Multidirectional Tap (Three Way Type) With Male And Female Connector, Drilled White Protective Lids Steaky To The Kit Without Blue Drilling. Tags For Identifying The Pressures Packaged Aside, All Kit Apparatus Must Be Connected Following The Closed System Criteria, Packaging: Individual, (L1) 4301.73481-Silent High Pressure Compressor, Specification: Compressor Should Have A Flow Of At Least 650 L/M, Working Pressure Up To 350 Bar Or 5 000 Psi. 220 And 330 Bar; Serpentins Made Of Stainless Steel, 4 -Stage Aluminum Compression Monoblock, Air -Cooled, Automatic 3 -Point Purge With A Solenoid, Four Recharging Terminals, Cabin Incorporated Control Panel With Information On Internship Pressure, Oil Pressure, Internal Temperature, Have Lubrication Pump, Oil Filter, Safety Valve After All Stages, Recommended Oil Change With No Minimum 1000 Hours Or One Year, Should Have Continuous Monitoring Of Co, Co2 And H2o With Display Indicator, Have A Digital Pressure Monitoring Instrument With Programming, Having Time Counter, The Chassis Should Be Silenced With A Maximum Of 75 Db Noise Level, 3 (Three) Filtering Internships, Pressure Safety Valve, Final Pressure Manimeters, At Least At Least 330 Bar, Minimum Engine 11 Kw Three -Phase, Minimum Four Outputs With Din 300 Bar With Yoki Adapter, Hoses Should Be With Non -Toxic Soul, External Recording For Breathable Air And Work Pressure Identification, Should Have A Cabin Or Set Of Recharging Booths For The Total Of 4 -Cylinder Produced In Steel That Ensures Air Circulation Protection, Have Air Circulation System, Have Lock For The Door, (L1) 4902.75103-Welding Machine, Type: Inverter, Welding Current: 200A, Voltage: 220V, Additional Characteristics: Other Information According To Reference Term And/Or Technical Descriptive, (L1) 6603.81123-Programmable Logic Contractor, Use: Laboratory, 04/07/2025, (L1), (L1), (L1) 4902.99190-Furate, Type: Bench, Specification: Voltage: 220V, Steel Drilling Capacity: 1
