(L1) 8503.4422 -Geralda, Type: Disposable, Composition: Pulp Or Cellulose Fiber, Overabsorbent Polymer (Flocgel), Polyethylene And Polypropylene Film, Not Polypropylene Tissue, Thermoplastic Adhesives, Elastic Strands On The Legs, Format: Anatomical, Use: Geriatric, Size: Extra Large - Above 90Kg, Packaging: Delivery With Plastic Package With 20 Units (Approximate Variation +/- 50%), Additional Characteristics: Exempt From Allergenic Or Toxic Substances Without Fragrance, With Uniform Surface, Free From Fucking Or Any Other Defect Harmful To Its Use, Unid. Measurement: Unit, (L2) 8503.4422-Office, (L3) 6522.77048-Coilboliating Coils, Material: Stainless Steel, Additional Characteristics: Other Information According To Reference Term And/Or Technical Process Descriptive, (L4) 6522.77048-Coil Embolizing, (L5) 6510.80561 Guide, Type: Lundequist Extra Stiff (Or Similar), Measurement: 0, 035 X 260Cm, (L6) 6510.80561-Fire Guide, (L7) 6522.81041-Petesis, Usage: For Staipedectomy Procedure, Material: Teflon (Ptfe) With Flexible Memory, Measure: 0, 6Mm, Length: 6, 00Mm, (L8) 6522.81041-Prosthesis, (L9) 6510.5566 Kingdom, Disposable, 20 Cc Without Luer Lock Needle, Made Of Polypropylene Or Other, Non-Toxic, Refined, Proper And Transparent Plastic That Allows Clear Viewing Of The Aspirated Fluid. Straight Cylindrical Body, With Perfect Inner Finish, Uniform Wall In Its Thickness. It Must Enable The Free And Smooth Movement Of The Plunger, To Present At The Distal End Of Retention Ring That Prevents The Detachment Of The Cylinder Plunger. Flange In Adequate Format To Support The Fingers And Give Stability To The Syringe When Placed On A Flat Surface. Marking: The Undergraduate Scale Should Be Applied To The Outer Surface Of The Cylinder Body, With A High Degree Of Precision, Traces And Light Registration Number, Legible Failure -Free, Remaining Clear Until Use. The Strokes Must Have A Uniform Thickness To Be Exempt From Irregularities Between The Spacings. The Undergraduate Scale Should Be Facing Upwards, It Is Easy To See When The Cylinder Body Is In The Use Position. Appropriate Siliconized Rubber Piston For Better Cursor Slip, Molded To Facilitate Fluid Aspiration And Injection. Present At The Proximal End, Properly Adjustable To The Body Avoiding Leaks, Firmly Fixed To Avoid Displacement At The Time Of Aspiration. The Plunger Cork Should Be Made Of Latex Free Material, Inert, Free Of Defects, Burrs, Should Ensure Smooth Slip Throughout The Course. During Aspiration And/Or Injection Cannot Separate From The Rod. Dimensions: The Specified Syringes Should Be Sized By Obeying The Universally Adopted Standards, And The Assembly Must Present The Distal End Of The Plunger In Relation To The Corresponding Body About 1 (One) Cm, Whose Difference Is Intended To Offer Adequate Handling Conditions, Packaging: Individually In Appropriate Enclosure And Which Is In Accordance With The Used Sterilization Process. Ensure Integrid, (L10) 6510.5566 Syringe, Packaging: Individually In Appropriate Enclosure And Which Is In Accordance With The Sterilization Process Used. Ensure The Integri, (L11) 6510.24706 60Ml Luer Slip Disposable Syringe, No Needle; Made Of Polypropylene Or Other P
