Quotation Are Invited For Speakers

Quotation are invited for Speakers Delivery Date: 2025/08/29 Delivery To: Support Services SUSE Delivery Address: 12 Hertzog Blvd, Cape Town Closing Date: 2025/07/07 Closing Time: 12:00 PM Description: 1 each x speakers Specification: * REFER TO GK12600008 Please supply the following Item The Alto Professional TS410 (Or equivalent) is a 2000W, 10-inch, 2-way active loudspeaker with Bluetooth and wireless stereo linking. It features a 10 driver, 2 voice coil, and a 1 exit ceramic driver with a 1.4 coil. The speaker also includes an integrated 3-channel mixer with dual XLR/1/4 combo inputs, independent level controls, and XLR mix output. It offers Bluetooth audio streaming and wireless stereo speaker linking. The TS410 has DSP modes for different speaker usages and can be controlled remotely via the Alto app. Detailed Specifications: # Output Power: 2000W peak (1300W LF + 700W HF), 1000W continuous RMS (650W LF + 350W HF) # Frequency Response: 57 Hz # 20 kHz (+/-3 dB) # Frequency Range: 48 Hz # 20 kHz (-10 dB) # Maximum SPL: 130 dB peak, 127 dB continuous # Crossover Frequency: 2 kHz # LF Driver: 10-inch driver, 2.0-inch (50mm) high-temperature voice coil # HF Driver: 1-inch exit ceramic driver with 1.4-inch (35mm) coil # Coverage: 90° horizontal x 60° vertical (nominal) # Inputs: (2) XLR+1/4 (6.35mm) TRS combo inputs (balanced) # Outputs: (1) XLR output (Link) # Bluetooth: Yes, for audio streaming and wireless stereo linking # DSP Modes: 4 speaker use modes (including custom EQ via app) # Weight: Approximately 12 kg (26.5 lbs) # Dimensions: 59 x 42 x 40 cm (23.2 x 16.5 x 15.7 inches) # Mounting: Pole-mountable, wedge monitor, or flown application with M10 suspension points # Amplifier: Class-D with fanless cooling # Mixer: 3-channel with dual XLR/1/4 inputs, mic/line switches, and independent level controls IMPORTANT: QUOTATION CONDITIONS CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the supplier#s commercial position (including joint venture agreements), preferencing arrangements, or samples of materials, considered necessary by the CCT for the purpose of the valuation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned may be declared no n-responsive. NB!!! PLEASE ENSURE THAT YOU ATTACH THE TECHNICAL DATA SHEETS AND PICTURES OF THE ITEM QUOTED ON, TO YOUR RFQ SUBMISSION****FAILURE TO ADHERE TO THIS REQUIREMENT, MAY RESULT IN YOUR OFFER BEING NON-RESPONSIVE**** #Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words or equivalent #NB: The Municipal Bidding Document 6.1 (MBD 6.1) is attached, in order to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with each and every RFQ submission, failure to submit will result in zero-point allocation. NB!!! Please note that the MBD document must be valid for a year. Please ensure that you attached an updated MBD document. NB!!! ***PLEASE ENSURE THAT ALL REQUIRED INSURANCES SUCH AS YOUR PUBLIC LIABILITY, EMPLOYERS LIABILITY OR COIDA AND MOTOR VEHICLE INSURANCE ARE ATTACHED AND THAT THEY ARE UP-TO-DATE. IF YOU UTILISE COURIERS AND DO NOT HAVE MOTOR VEHICLE INSURANCE, THEN PLEASE MENTION THIS. YOU ALSO NEED TO ENSURE THAT YOUR DECLARATION OF INTEREST AND BBBEE IS UPDATED ON YOUR PROFILE OR ATTACH IT TO THIS RFQ*** Tender Link : http://web1.capetown.gov.za/web1/ProcurementPortal/RFQ/Details/306438

Refer document

FileName	File Description
Global Tender Document	Tender Notice