Bids Are Invited For Inquiry Of 300 Unjato Hydrometers And 1000 Units Of Multijato Hydrometers, The Base Of Housing Change In The Proportion Of 1 (One) Carcass Per Hydrometer Purchased.
Bids Are Invited For Inquiry Of 300 Unjato Hydrometers And 1000 Units Of Multijato Hydrometers, The Base Of Housing Change In The Proportion Of 1 (One) Carcass Per Hydrometer Purchased.
Hydrometers Multijato Q3 = 1, 6M³/H X ¾, Tachymric Mechanical Type With Magnetic Transmission System, Pre-Equipped For Telemetry With A Sensor Fitting That Should Not Obstruct The Visual Reading Of Rollers When The Sensor Installed. Ip 68 Dried Watchmaking, Enables Reading At 45 Degrees, Through Cyclometric Cylinders, 04 Rollers With The Numbers In Black For M³ And 02 Rollers With Red Numbers For M³ Submultiples, All Rollers Must Have The White Background; The Watchmaking Should Allow Turning To Read Up To 360 Degrees With Rotation Limiter; Must Have Anti -Fiprude Internal Metal Ring; Glass Cupula, With Excellent Transparency And Uv Protector; Have Class Iii Magnetic Shielding; Have Protective Internal Metallic Ring Against Hot Needle Fraud; With Articulated Lid. Metrologic Class B When Installed In Horizontal Position Being The Flows Q3 = 1, 6 M³/H; Q2 = 20 L/H And Q1 = 12, 8 L/H; R = 125 And Q4 = 2, 0 M³/H. Bronze Or Latao Carcass With Metal Alloy With Minimum 60% Proven By League Certificate With Blue Electrostatic Painting. Axes Should Be Aisi 304 Stainless Steel. Turb, Separating Plate And Central Pine Lines Should Be Sapphire, Fatigue Resistant And Other Internal Components Made Of Engineering Thermoplastics. Must Contain Sequential Numbeance On Both Sides. Service Pressure Of 1, 0 Mpa. Service Temperature Up To 50 Degrees, Ie Class T50; Metal Lacration Screw. Admit A Maximum Leak Of 2, 0 M³/H, Dn 20 Mm (3/4) 115 Mm In Length. Identification: Name, Capacity, Year Of Manufacturing And Direction Of Flow At High Or Low Relief On Both Sides Of The Carcass. The Manufacture Of Hydrometers Must Comply With Nbr 8194: 2019 And Nm 212/99. The Quantities Of Samples And Acceptance Criteria Will Be According To Nbr 15538: 2014 And Nbr 5426: 1985 - Normal Simple Sampling Plan, Level Of In ..., Hydrometro Unijato Q3 = 1, All Rollers Must Have The White Background; The Watchmaking Should Allow Turning To Read Up To 360 Degrees With Rotation Limiter; Must Have Anti -Fiprude Internal Metal Ring; Glass Cupula With Excellent Transparency And Uv Protector; Have Class Iii Magnetic Shielding; Have Protective Internal Metallic Ring Against Hot Needle Fraud; With Articulated Lid. Metrologic Class B When Installed In The Horizontal Position Being The Flows Q3 = 1, 0 M³/H. Bronze Or Latao Carcass With Metal Alloy With Minimum 60% Proven By League Certificate With Blue Electrostatic Painting. The Axes Should Be Stainable Aisi 304. The Turbine Bearings, The Mpa. Up To 50 Degrees Service Temperature, Insp ...
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
