Eucatex Reed With 3 Cm X 13 Cm, Ovitrampa Trap With Full Installation Accessories. 01 Black Plastic Vessel With Capacity To Approximately 800 Ml (Already With A Hole At A Height Of 300 Ml); 02 Eucatex Reed With 3 Cm X 13 Cm (L X C); 02 Metal Clips), 17X14 Lid Case For 20 Palettes Cap With Transparent Acrylic Lid, Measuring 17X14x4, 5 Cm (C X L X A), With Capacity For Packing And Transport Of 20 13 X 3 Cm Reeds That Are Accommodated Vertically And Suspended In Their Interior, Away From Each Other, So They Do Not Touch And Not Also Play And Not Play They Touch The Floor Of The Case. Therefore, There Is No Possibility For A Positive Reed (Containing Eggs) To Contaminate Another Negative (Without Eggs), And Minimize The Risk Of Mosquito Egg Loss At The Contact Of The Reed With The Bottom Of The Case. Color: Transparent, Size: 45Mm X 100M., Mascara Meets Abnt Nbr (13694) 13696 Maintenance Respirator Intended For Air Purification, Composed Of An Atochetic Thermoplastic Whole Facial Part And Two Connecting Connectors For Filtering Elements. The Facial Protector Is Transparent Polycarbonate With A Large Visual Field Protected By A Transparent And Disposable Self -Adhesive Film. At The Rear Of This Device, The Mascarilha Is Fits, Made Of Blue Elastomer. The Masquerade Has Two Inhalation Valves, Located, Respectively, On Each Of Its Sides. The Body Of The Part Has Two Openings Located On Its Lower Sides, One On Each Side, Used To Fit Two Brackets Of Black Rigid Plastic Material, Endowed, In Its Front, A Threaded Fitting, To Fix The Chemical And Combined Filters Or The Fixing Base For The Use Of Mechanical Filters. At The Back Of Each Of The Supports, An Inhalation Valve Is Fixed. The Piece Has An Elastic Tie With Five Fixing Points, Endowed In Its Central Part, A Leather Support For Head Support And Attached To The Edge Of Their Via Metal Clips, Fixed Through Straps Of Plastic Material, Glued To The Part. For The Use Of Mechanical Filters, A Filter Holder Is Used, With A Base Of Black Plastic Material With Threaded Fitting In Its Back And A Translucent Plastic Lid, Which Is Fitted To This Base To Fix The Filter. The Model Is Suitable For Protection Of The Users Respiratory Pathways Against Solid Particle Inhalation, When Used With Mechanical Or Combined Filters And Against Gases And Vapors, When Used With Chemical Or Combined Filters: 1-1-Class 1: 7500. 1-Organic Vapors; 7500.2-Acid Gases; 7500.3-Organic Vapors And Acidic Gases; 7500.4-Monia And Methylamine. 2-Mechanical Filters: 7500.6-For Dust And Mists (P1); 7500.25-For Dust, Mists And Fumes (P2). 3-Combined Filters: (Class 1 Chemist And Class P2 Mechanic):, 02/07/2025, Full-Body Clothing With Hydrorepelers Treatment. Full Body Clothing Made Of 58% Cotton Fabric, 42% Polyester, With Hydrorepented Treatment. Long -Sleeved Jacket Has Minimal Chest Height And Front Closure Per Velcro. Arabic Hood Adjusted By Internal Cord In The Jacket Bar. Long Pants With Cord For Waist Adjustments And Protection Of Waterproof Fabric On The Legs, With A Reflective Knock And Navy Blue. In Sizes
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
