Tenders Are Invited For Construction Work - Reconstruction Of The Road And Pavement On The Steel Bridge Along With The Corrosion Protection Of The Bridge And Illumination.

Construction Work - Reconstruction Of The Road And Pavement On The Steel Bridge Along With The Corrosion Protection Of The Bridge And Illumination.. The Subject Of The Order Is Constituted By Construction Works, Consisting In The Renovation Of The Road And Pavement On The Side Of The Upper Water, Performing The Anti-Corrosion Protection Of The Steel Structure, Lighting And Illumination Of The Steel Bridge On The Vistula River In Włocławek Marshal Edward Śmigły - Rydz. The Order Will Be Carried Out On The Basis Of Studies - Executive Projects Of The Bridge, Road And Electrical Industries. Existing Condition: Bridge Marshal Edward Śmigły - Rydz In Włocławek Consists Of Three Parts Diverse In Terms Of Construction: 1) Left -Bank Part Made In The Form Of A Reinforced Concrete Viaduct With A Total Length Of 121.5 M And Width Of 11.70 M, 2) Of The Current, Which Is A Steel Bridge With A Total Length Of 623 M And Width 13.10 M, 3) Right -Bank Made In The Form Of A Reinforced Concrete Viaduct With A Total Length Of 13.0 M And Width Of 11.70 M. Steel Bridge Geometry: - Total Length: 623 M; - Total Width: 13.10 M; - Spans: 68.80 M + 5 X 96.32 M + 68.80 M; - Axial Spacing Of The Lattice Girders: 7.50 M; - Road Road: 2 X 3.0 M; - Pavement Width: 2 X 2.45 M; - Transverse Decrease In The Pavement To The Curb: 2.5%. Designed State: Renovation Works Of The Bridge Of Marshal Edward Śmiegły - Rydz In Włocławek: 1) Making The Surface At A Length Of 623 M. 2) Reprofization Of The Plate At A Depth Of 30 Mm. 3) Exchange Of Expansion Joints. 4) Replacement Of Rainwater Sewage Grooves. 5) Arranging New Insulation. 6) Laying New Layers Of Surfaces. 7) Anti -Corrosion Of Steel Structure. In The Renovation Works Of The Pavement Of The Bridge Marshal Edward Śmigły - Rydz In Włocławek Include: 1) Demolition Of The Existing Pavement Plate And A Reinforced Concrete Beam Under It. 2) Making A New Reinforced Concrete Beam With Dimensions Of 20X40 Cm. 3) Making A New 12 Cm Reinforced Concrete Board. 4) Execution Of Apparent Expansion And In Places Of The Bridge Expansion. 5) The Insulation Of The Pavement Plate. 6) Making A Pavement Of A Mixture Of Epoxy And Polyurethane Resins. 7) Adapting The Balustrade To Bicycle Traffic. Lighting Assumes: 1) Construction Of A Power Network (Cable) Below 1 Kv. 2) Construction Of Rack Control Cabinets Pcs. 4) Installation Of The Designed Luminaires. A Detailed Description Of The Subject Of The Contract, Including Technologies And The Scope Of Construction Works, Were Specified In The Project Documentation And In The Detailed Technical Specifications Of Construction And Acceptance Of Construction Works, Constituting Annex 12 To Swz. Detailed Obligations Of The Contractor Regarding The Implementation Of This Contract Are Determined By The Proposed Provisions Of The Contract, Constituting Annex 5 To Swz. The Scope Of The Subject Of The Contract Also Includes: 1) As -Built Inventory; 2) After Completion Of Works - Restoring The Construction Site To Its Original State; 3) Before Commissioning The Built Street Lighting For Operation - Chection