Tenders Are Invited For Construction Works Involving The Replacement Of A Passenger Crane In A Residential And Service Building At Ul. Ugly 16 In Lublin
Tenders Are Invited For Construction Works Involving The Replacement Of A Passenger Crane In A Residential And Service Building At Ul. Ugly 16 In Lublin
3 Ugly 16 In Lublin. The Work Of The Work Covers The Following Activities: 1.1. Preparatory Work1) Development Of The Technical Documentation Of The Crane And Agreement At The Stage Of Assessing Compliance With The Appropriate Notification Unit And Obtaining The Ce Certificate After Tests, 1.2. Replacement Of The Crane1) Disassembly Of All Components Of The Electrical Crane In The Glass And Engine Room, And Their Removal And Disposal At The Cost Of The Contractor2) Installation Of A New Electrical Crane Without A Engine Room With A Lifting Capacity Of Q = 1000 Kg, Including: A) Enlargement Of Existing Door Openings Enabling The Installation Of Central Automatic Shaft Door With Dimensions Of Min. 900/2000Mm Of Stainless Steel Satinab) Removal Of Defects And Mounting Holes On The Existing Crane In The Walls Of The Elevator And The Nadziebia Plate: Making Bricklaying On Cement-Lime Mortar, C) Making A Thin-Shift Layer Of The Floor Leveling Layer, D) 2 Times Painting With White Painting Non -Clinging Together With Priming, E) Installation Of Cabin And Counterweight Guides, F) Installation Of A Cabin Frame With Tricks, G) Assembly Set Counterweights (Frame + Blocks), H) Assembly Of The Propulsion Unit (Non -Vegetable Winch), I) Installation Of Load -Bearing Lines With A Speed Limiter And A Cable, J) Installation Of A Control Board With A Inverter In The Current Crane Engine Room (Power Supply 20%, It Is Allowed To Change The Location When Consulting With The Employer And Manufacturer Fire For An Evacuation Stop In The Case Of A Fire Signal As Well As A Device For The Ups Emergency Congress In The Event Of A Voltage Disappearance - Exit To The Nearest Stop, K) Installation Of A Crane Cabin By Stainless Steel Satin With Lighting Led Panel Lighting (Lighting In The Ceiling Plane), L) Cabin Door Assembly With Dimensions Of Min. 900/2000 Mm Made Of Satin Stainless Steel, M) Installation Of The Viricidal Flow System To Ensure Purely Microbiologically Provide Air Inside The Jigun Cabin) Installation Of The Light Curtain In The Cabin Doors3) Replacement Of Bolts For Bumpers In The Wanchy4) Replacement Of Bumpers5) Replacement Of The Set. Crane Installation In The Glass, On The Cabin6) Replacement Of Shaft Lighting (Led System) 7) Installation Of Cassettes Calls With A Bumpkin At Each Stop Lcd8) Replacement Of The Panel Of Instructions With A Lcd Bumper In The Cabin In Cabin9) Installation Of The Communication System Between The Cabin And The Gsm10 Rescue Services). If The Existing Power Supply Is Insufficient, 11) Replacement Of Protection Of The Main Crane In The Electrical Switchgear On The Building12) Bringing To The Bednarka Pit - The Expansion Division In Order To Properly Perform The Electrical Measurements Of The Crane13) Making Lighting On Each Of The Motion Detector (Led System), 14) Demolition Of The Enclosure Of The Closed Installation Chess Before Reaching The Level Of Installation Plaster And Painting Defects, 15) Finishing Works On The Platforms
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
