Tenders Are Invited For Delivery And Assembly Of Air Conditioning And Ventilation Systems To The Gamma Calibration Room (No. Zp001/2025/Clor)

Delivery And Assembly Of Air Conditioning And Ventilation Of The Gamma 1 Calibration Hall. Implementation Of Project Documentation That Is The Basis For The Selection Of Devices. A Construction And Building Inventory Of Ventilation Engineers And Rooms Served By Air Conditioning Control Panels. B) Selection Of Ventilation-Climate Devices (Headquarters, Refrigeration Aggregates, Humidifiers) Taking Into Account The Currently Applicable Provisions And Technical Standards, Including Energy Efficiency Requirements (In Particular, Among Others, Resulting From § 151 (1) Of The Regulation Of The Minister Of Infrastructure Of 12 April 2002 On The Technical Conditions To Be Met By Buildings And Their Location (I.E. Journal Of Laws 20122 Item): In The Installations Of General Supply And Exhaustive Mechanical Ventilation (...) With A Capacity Of 500 M3/H And More Should Be Used For Heat Recovery From Exhaled Air (...). Air Conditioning; On The Installation Of Humidifiers (Water Supply And Condensation And Removal); About The System Of Automation And Control Of Akpia.2. Dimensions Of The Calibration Hall: A) Gamma Calibration Room Dimensions: 4 M Height, Width 8.7 M, Length 8.4 M.3. The Air Conditioning And Ventilation System In The Gamma Calibration Hall: A) Delivery And Assembly Of A New Ventilation Unit With Heat Recovery On The Cross Exchanger; B) Delivery And Installation Of A Refrigeration Unit, Steam Humidifier And Softening Filters To The Steam Moisturizer; C) The System Must Ensure In The Gamma Calibration Hall: For Air Exchange In The Gamma Room: 6. W/H, O The Ability To Control The Temperature In The Range Of 18 0C -22 0C, For The Possibility Of Controlling Relative Humidity In The Range Of 30 % - 75 %, To Maintain The Abovementioned Parameters For A Minimum Of 8 Hours A Day; D) Mechanical Cleaning Of The Old Ventilation, Supply And Exhaust Installation For The Gamma Room; E) Execution Within A New Channel Ventilation Installation Along With Thermal Insulation; F) Performing A New Refrigerated Installation And Technological Heat Connection To A New Ventilation Unit; G). Steam Moisturizer; H) Connection To The Existing Electric Power Supply; I) Supply And Installation Of Automation To The Ventilation And Air Conditioning System For The Gamma Room; J) Launch And Adjustment Of The Operating Parameters Of Ventilation And Air Conditioning Installations. Delivery And Assembly Date: A) Up To 120 Days From The Date Of Signing The Contract. 5. Formal Requirements: A) Warranty Period Not Less Than 24 Months.B) Warranty And Post -Warranty Service With Consumables, I.E. Air Filters, Humidifiers, Etc. Tanks, Etc. In The Period Of Warranty Granted. External Service, The Obligation To Deliver Part Of The System To The Website, And After Repairing To The Ordering Party And Cover The Costs Of This Transport, The Contractor Is Charged, The Contractor Also Charges The Risk Of Loss Or Damage To The System. E) The Contractor Will Provide A Set Of As -Built Documentatio