Bids Are Invited For Acquisition Of Various Dental Equipment.

Photopolymerizer Apparatus - Must Have Power Of Up To 2500 Mw/Cm². Have At Least Two Power Modes For The Dentist To Use At Low Or High Power According To The Necessary Procedure. Being Able To Polymerize Resin Layers In Just 1 Second, Giving Agility To Work In Our Health Posts. The Led Should Be At The Tip Of The Device For Better Energy Delivery. It Should Not Have Fiber Optics To Avoid Breaks And Costs For The Municipality. It Should Track Eye Protector, Application Tip, Tip Protection Covers And Thickness Scale For Resin Healing Time. The Battery Must Be Of At Least 1300Mah. The Led Should Be At Least 5W Of Power, The Maximum Weight Should Be 300G. You Should Present A Company With Crea– Es That Will Be Responsible For Installation, Monthly Preventive Maintenance For 12 Months In All Units And Corrective Maintenance At No Cost., Dental X -Ray Apparatus - Practical And Easy To Operate, With 7Mm -Emitted Sender Tube Intensity, 1200W Power Tube Intensity, Thermoelectric Insulation By Oil Head Immersion, Remote Control, Selection With Spiral Cable Tenth And Hundredths Exposure Of The Second, Sound Beep Combined With The Emission Of X -Ray, Articulated Arm, Oil Expanding Chamber, 0, 8 X 0, 8Mm Focus And Lock System That Prevents Firing In Cases Of Voltage And Sub Tension. Accompanying 300 Mm Collimator Cylinder Stabilizer Using Prolonger, Rectangular Collimator. Have Inmetro Certification Based On The Iec-601 International Radioprotection Standard And Full Adequacy All Requirements Of Ordinance 453 Of The Health Surveillance Secretariat. 127V Voltage At 60 Hz. All Accessories Must Be From The Same Manufacturer. Technical Qualification: Declaration Of Technical Assistance From A Company In The State Of Espírito Santo With A Copy Of The Registration In Crea And Is Responsible For The Installation And Provision Of Services During The Warranty Period For The Quoted Items. Provide Training To Users After Equipment Installation., Autoclave With Stainless Steel Pressure Vessel Of At Least 20L. To Sterilize Articles And Thermal Instruments Using Saturated Vapor Under Pressure. Must Have A Traceability System That Complies With Nbr Iso 13485. It Must Have An Inmetro Registration As Per Ordinance Inmetro No. 255 Of 29/05/2014. You Must Have Lcd Display With At Least 4 Sterilization Programs. Enable Efficient Drying With Closed Door. It Must Have And Enable The Use Of 4 Aluminum Or Stainless Steel Trays In The Chamber. The Lid Should Be Stainless Steel For Greater Safety And Ease Of Cleaning. It Must Have Altitude Adjustment System To Avoid Sterilization Failures. It Must Have Automatic Disregard And Depressurization. Have Extra Drying Program, Electronic Data Crossing System, Key And Door Lock. It Must Be Automatic Bivolt. Power Consumption Of A Maximum Of 800 Watts Per Hour. Maximum Distilled Water Consumption Of 300 Ml Per Cycle. Must Present With The Proposal The Proof Of The Manufacturers Registration In Inmetro. Minimum Power Should Be 1500 Watts. Have A Diameter Of At Least 24 Centimeters And Depth Of The Pressure Vessel At Least 45 Centimeters. Minimum 2 -Year Manufacturer Warranty. The Packaging Should Contain The Graduated Glass, Tray Support, 4 Trays, Trays, Clamp And At Least 1