1) As Part Of This Order, The Contractor Shall Provide The Ordering Party With Aggregate In The Following Types And Quantities: Natural Braneless Aggregate With A Continuous Grainage Of 0/31.5 Mm - 700 Tons; Natural Branery Aggregate With A Constant Grainness Of 0/5 Mm - 600 Tons; Sand For Road Purposes With An Indicator Of Granation Of Grainness Not Lower Than Ton.2) Parameters That Aggregates Must Be Met: Natural Aggregate With A Continuous Grainness 0/31.5Mm And 0/5Mm-Norm (According To Pn-En-13242) Or Equivalent; Sand For Road Purposes With A Indicator Of Variability Of Grainness Not Lower Than The U3 Category-Norm (According To Pn-S-20205) Or Equivalent News! The Contracting Authority Does Not Allow Grayoglas Aggregates For 0/31.5 Mm.A. Aggile Properties Required To Mixtures With A Constant Grain Of 0-31.5 Mm Fraction: A) Granation - Category Not Lower Than: Ga85.B) Limit Of Granation Tolerance - Category Not Lower Than: Gta20.C) Percentage Content Of Grains With A Cross And Broken Surface - Category Not Lower Than: C90/3.D) Dust Content - F9 F15.E) Flat Indicator - Category Not Higher Than: Fifia50.F) Shape Indicator - Category Not Higher Than: Si55.G) Frost Resistance - Category Not Higher Than: F2.H) Soaked: Category Not Higher Than: Wa242.I) Content Of Foreign Pollution: None.J) Sand Indicator - Category: Se4 Minimum 35.B. The Required Aggregate Properties For Mixtures With A Constant Grain Of 0/5 Mm Fraction: A) Granification - Category Not Lower Than: Ga85.B) Limittal Tolerance - Category Not Lower Than: Gtc20.C). 3.04Mg/M3.C. Required Properties Of Sand For Road Purposes: A) Variety Of Grainness: Category Not Lower Than: U3.B) Watercolor Indicator: Category K10≥6*10-5.C) Sand Indicator-Category Se4 Minimum 35. Note!
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
