Playground 1 Tower: Manufactured With Main Structure In Square Columns In Wpc Ecological Wood, Measuring At Least 120 X 120 Mm, Made Up Of Wood From Reuse And/Or Reforestation, Recycled Biodegradable Polyethylene And Additives Giving Greater Rigidity And Durability, With Biodegradable Polythylene. Galvanized Hardware And Electrostatic Painting To Dust, Items Below With Approximate Measurements Can Vary By 5% More Or Less: - 01 (One) Tower With Platform Measuring Approximately 1, 07 X 1, 07M Installed At Approximately 1, 20M Of Ground Height (Floor), Made Of Plastic Wood Floor And Galvanized Steel Structure, Containing Rotomoldated Biodegraded Polyethylene Cover Square Pyramid Measuring Approximately 1, 35 X 0, 80M High; - 01 (One) Auxiliary Level With Platform Measuring Approximately 1, 00 X 1.00M Installed At Approximately 0, 90M Of Ground Height (Floor), Manufactured With Rotomolded Biodegradable Polyethylene Floor And Structure, Made With Main Structure In Square Columns In Ecological Wood Wpc 100%, Items Below With 5% Or Less: - 02 (Two) Platform Towers Measuring Approximately 1, 30M Soil Height (Floor), Made Of Biodegradable Plastic Wood Floor And Galvanized Steel Structure, Containing Roundable Polyethylene Round Cover Rotomolded Measuring Approximately 1, 65 X 0, 80 M High; Rotomolded Biodegradable Polyethylene Horizontal Tube Measuring Approximately 2, 00 Meters Long X 80 Cm Opening; Biodegradable Polyethylene Caracol Slide Rotomolda With Assuxe Deck With Ass, Balance Mp 12X12 2 Seats Kids Seat: Main Biodegradable Plastic Wooden Columns, Higher Structure In At Least 2 ”X 2 Mm Carbon Tube; 1” ½ X 2 Mm With Lateral Polyethylene Decorative Finishing Biodegradable Rotomolded Biode; Carbon Steel Plates Of At Least 3 Mm; Rotomolda Plastic Kids Seat. Uses Massive Shaft, Nylon Bushings, Galvanized Chains, Polyester Electrostatic Powder Painting, Mig Weld. Installation In Closed Or Outdoor Areas, Resistant To Climate Actions. - Measurements: Length: 3759 Mm X Height: 2492 Mm X Width: 1542 Mm. Note: The Bidding Company Should Present: Reports And Certificates In The Name Of The Manufacturer, That The Material Used In The Manufacture Of Accessories Meets The Following Standards: Nbr 17088: 2023 - Corrosion By Exposure To Saline Of At Least 3,500 Hours, Test Methods Without Corrosion Products In The Base Metal, Classified As Ri0, According To Nbr 4628-3. Without Ink Film, Cl, 8 -Seater Carousel Roto Av Ch: Made With Carbon Steel Tubes At Least 3 ½ X 3 Mm; 1 ½ X 2 Mm; 1 ”X 1, 5 Mm; Carbon Steel Sheets Of At Least 3, 18; Biodegradable Polyethylene Seats Rotomolded With Anti -Uv Protection. Uses Massive Axis, Double Bearings, External Metal Caps, Resistant To Climate Action. Manufacturer, Classified As Grade D0/T0, According To Nbr 5841. Nbr 15454: 2007 - Test Of The Properties And Structure Of Metals And, Seesaw Double Pear Seat: Manufactured With Carbon Steel Tubes At Least 1 ½ X 2 Mm; Steel Sheets C
