Chair - Type: Operational With Polypropylene Back With Arms; Minimal Characteristics: Internal Seat Made Of Polyamide With Damping System, Foam Injected Into Cfc -Free Polyurethane, High Resilience, High Tear Propagation Resistance, High Stretching And Rupture Voltage, Low Dynamic Fatigue And Low Deformation, With 35 Mm Thickness, Protection Cover; Backrest: Structure Injected In A Single Piece With Holes That Favor The Users Heat Exchange, Fixed Directly In The Mechanism, Being: 440 X 430 Mm (L X A); Base: For 5 -Legged Chair And Armchair, Manufactured By Polyamide Engineering Resin Process (Nylon 6) With Approximately 30% Fiberglass. With 5 (Five) Rods And Housing Hitch In The 11 Mm Diameter Dispensing With The Use Of Fixing Bushings. Coupling System A; Structure: Structural And Finishing Injected Under The Seat With Rounded Edges That Dispense With The Use Of The Pvc Profile, Does Not Use Glue In The Coating Fixation, Has Depth Adjustment Of The 50 Mm Course, 480 Mm Width And Depth Of 435 Mm; Pealing Coating In P Fabric P; Arm Support: Integrated To The Backrest Structure, With Depth And Height Adjustments; All Components Made Of Steel With Finishing Electrostatic Painting Fully Automated In Epoxy Powder With Pretifestic Pretreatment Free From Heavy Metals (Vos) Compounds Volatile Or Hydrocarb; Mechanism: Eccentric Synchronized With Automatic Reclining Motion Voltage Adjustment, With 4 Adjustment Positions, Spine With Gas -Driven, Swivel, Made Of 50 Mm And 1, 50 Mm Thick Steel Tube; Bushing Guide For The Injected Piston With Engine Engineering Resin.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
