Bids Are Invited For Price Registration For Eventual Acquisition Of Hydrometers, Anti-Fraud Seals And Other Related Materials, According To Conditions, Quantities And Requirements Established In The Term Of Reference.
Bids Are Invited For Price Registration For Eventual Acquisition Of Hydrometers, Anti-Fraud Seals And Other Related Materials, According To Conditions, Quantities And Requirements Established In The Term Of Reference.
Sealing Ring For 20 Mm (3/4) Dn Tube, According To The Following Specifications: Tubetal Sealing Ring (Garrison, Washer, Seal) For 20Mm Dn Measurement Tubet (3/4); Made Of Approximately 65 Shore `` A´´ Pvc Rubber; Black Color., Hydrometro 3/4 Minimum Hydrometer Technical Specification, Unique/Monojato Model, Nominal Diameter Of ¾ (Dn 20), Permanent Flow (Q3) Of 1, 6 M³/H And Overload Flow (Q4) Of 2, 0 M³/H. A. Spealkimetric Type Hydrometer; Unijato /Monojato. I. Speeding Hydrometer. Ii. Magnetic Transmission Mechanism. Iii. Device That Avoids The Action Of External Magnetic Fields. Iv. Meter Length Should Fall To 115 Millimeters. V. Maximum Working Temperature Between 40ºc And 60 ° C. Vi. Nominal Diameter (Dn) ¾ ”; 20Mm. B. Watchmaker. I. Dried, Sealed And Tightness (Ip68). Ii. Inclined Watchmaking Which Enables Reading At An Angle Of 45. Iii. At Least 355 Degrees. Vi. Indication Of The Totalizing Device By The Combination Of Cycling And Circular Scales With Dry -Type Pointer. Minimum 10 (Ten) Bar. D. Class I. Range (R) 80 Ii. Overload (Q4) Of 2, 0 M³/H. Iii. Following Specifications: Rigid Device Applicator Type Ob (Cutting Bullet Key), Measuring 20 (Twenty) Centimeters; Made Of Carbon Steel With Anti-Corrosion Treatment With Injected Polypropylene Cable, Heavenly Rigid Applicator For Suppression/Water Cut-15Cm, 06/27/2025, 3/4 Red Anti-Fraude Seal, According To Specifications: Hydrometer Anti-Type Seal: For Tube To The Measurement Of 20Mm (3/4), Made Of Red, Red-Resistant Polypropylene. Ultraviolet; Biparty Circular Form, With Four Locks, With Drain In Each Of The Halves To Avoid The Accumulation Of Water; (3/4), In Blue, With At Least Two Locks, One On Each Side, With A Drain In Each Halves To Avoid The Accumulation Of Water; Cutting/Suppressor): With 1/2 Diameter; With Central Pin With Female Adapter, Washers And Hexagents, Made Of Steel With Anti -Corrosion Treatment;
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
