Quotation Are Invited For Clothing Items : Various Items

Quotation are invited for Clothing Items : Various Items Delivery Date: 2025/08/08 Delivery To: Logistics - Ndabeni Store Clothing PH: 021 444 5453 Delivery Address: 1 25 Oude Molen Road, Ndabeni Closing Date: 2025/07/07 Closing Time: 03:00 PM Description: 20 pair x shoes;safety;ladies;black;stc;3 50 pair x boots;chelsea;fem;ntc;brn;3 15 each x cap;welder skull;all;unisex;bl 20 each x hat;hard;plastic;yellow Specification: * REFER TO: GA12500660 SHOES - TYPE: Safety; GENDER: Female; COLOUR: Black; UK SIZE: 3; TOE CONSTRUCTION TYPE: Steel toe cap, Withstand impact load of 200 joules; MATERIAL: Upper 2.0-2.2mm Chrome tanned, full grain Lunar Buffalo leather, Leather should be tanned to allow for softer/more comfortable feel. Fully padded collar and padded ½ bellows tongue should give additional comfort and support ankles; VAMP LINING: must have perspiration absorbency that will result in low heat build-up, should be treated to impart additional hygienic, anti- bacterial and anti fungal properties; SOLE: 9.5mm Double Density PU injection, Shore hardness of 0.63 - 0.65 for flexibility and slip resistance, should also be oil and chemical resistant, a reinforced shank to be moulded into the midsole to give additional support under the arch of the foot; SPECIFICATION: Operations requiring wearing safety shoes for entire shift, walking and standing for long periods, working in wet grass, on warm dry soil, deep sand, in workshops etc; STANDARD: SANS/ISO 20345, Made in South Africa. QUOTATION CONDITIONS: CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the supplier#s commercial position (including joint venture agreements), preferencing arrangements, or samples of materials, considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned may be declared non-responsive. # Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words or equivalent # NB: The Municipal Bidding Document 6.1 (MBD 6.1) is attached, in order to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with each and every RFQ submission, failure to submit will result in zero point allocation. NB PLEASE SUBMIT SAMPLE PICURE AND SPECIFICATION SHEET WITH YOUR RFQ SUBMISSION, IF NOT RECEIVED YOU MAY BE DEEMED NON COMPLIANT *** PLEASE ENSURE THAT ALL REQUIRED INSURANCES SUCH AS YOUR PUBLIC LIABILITY, EMPLOYERS LIABILITY OR COIDA AND MOTOR VEHICLE INSURANCE ARE ATTACHED AND THAT THEY ARE UP-TO-DATE. IF YOU UTILISE COURIERS AND DO NOT HAVE MOTOR VEHICLE INSURANCE, THEN PLEASE MENTION THIS. ALSO ENSURE THAT YOUR UPDATED DECLARATION OF INTEREST AND BBBEE IS ATTACHED AT ALL TIMES*** * REFER TO: GA12500660 BOOTS - STYLE: Chelsea; GENDER: Female; TOE CONSTRUCTION TYPE: Without toe cap; COLOUR: Brown; SIZE: 3; UPPER MATERIAL: Full Grain Leather; SOLE: PU Sole Unit; SPECIFICATIONS: Water repellent, static resistant and shock absorbent. Pull strap for ease of pulling the shoe on. Elastic side gussets for additional comfort; STANDARDS: SANS 20347 ; COMPLIANCE: Manufactured according to SANS 20347 ; PACKAGING: Boxes are to be identified/marked with content description, size of boots, CCT material code and the CCT purchase order number. * REFER TO: GA12500660 CAP - TYPE: Welder skull; SIZE: One size fits all; GENDER: Unisex; COLOUR: Blue; APPLICATION: welding/fire/electrical; MATERIAL: heavy duty 100 Cotton D59 drill fabric - flame and acid retardant, Protection for head and neck against light heat sparks/welding applications. * REFER TO: GA12500660 HAT - TYPE: Hard; MATERIAL: Plastic; COLOUR: Yellow; SPECIFICATIONS: Cap style with quick release chin strap; STANDARDS: Manufactured according to SANS 1397 or EN 397; COMPLIANCE: Product to certified by a recognised SANAS accredited certification body or an internationally accredited certification body. Tender Link : http://web1.capetown.gov.za/web1/ProcurementPortal/RFQ/Details/306264

Refer document

FileName	File Description
Global Tender Document	Tender Notice