Permanent. Division Of 45 ° Polypropylene D 20 Mm, Fitting For Use When Installing And Repairing Hot And Cold Water Supply Systems, As Well As Heating Of The Premises. Division 45 °, Conditional Diameter Of 20 Mm, Made Of Polypropylene. The Material Is Resistant To Moisture, Not Subject To Corrosion, Durable. Fitting Is Designed To Increase Temperature To +95 C And Maximum Operating Pressure 25 Bar. The Product Is A Double -Sided Fitting That Is Used To Connect Two Pipes At An Angle Of 45 Degrees. Installation Is Carried Out Using Chipping Welding., Iron. Assistance Apparatus For Welding Aspt-1000A Plastic Pipes. Pvc Iron, A Soldering Iron For Plastic Pipes, Which Is Quickly Heated, Easily Controlled, Allows You To Quickly And Efficiently Weld Polypropylene Pipes And Fittings Among Themselves. The Device For Welding Pvc Pipes Differs In A High Level Of Power (1000 W). Supp That On The Case. Pipe Welding Is Carried Out By Heating The Parts To The Melting Point And Subsequent Connection. Thanks To The Anti -Stick Teflon Coating, The Nozzles For Soldering Are Distinguished By A Long Service Life, The Pvc Or Pp Pipe Does Not Stick To The Instrument. The Soldering Iron For Polypropylene Hermetically Connecting The Pipe Of The Plumbing Water, A Pipe For Heating In The Seam Places. A Metal X-Shaped Tool For The Tool Gives The Apparatus Increased Stability, Which Is Convenient For Interruptions In Operation. A Reliable Diffuse Connection Of Polypropylene Pipes And Fittings With A Diameter Of 20 To 63 Mm Is Provided. An Important Feature Is A Convenient And Functional Temperature Controller (Automatic Thermostat), Which Can Be Changed From 50 To 300 ° C. The Fever For The Bell -Shaped Welding Is Equipped With An Indicator Of The Network Connection. Welding Apparatus - A Professional Tool For Welding Polypropylene Pipes. The Set Of 6 Paired Nozzles With A Diameter Of 20.25.32.40.50.63., The Polypropylene D 20 Coupling Is Used To Connect Parts Of The Pipe From Polypropylene. Connection Method - Bell -Shaped Welding., The Polypropylene D 25 Clutch Is Used To Connect Parts Of The Pipe From Polypropylene. Connection Method - Bell -Shaped Welding., Tee. The Plate Of Equivalent From Polypropylene Is Used To Create A Connection Of Three Sections Of Pipes During Installation Or Repair Of The Pipeline. It Is Used In Systems Made Of Polypropylene Pipes, Mounted In Them By Blank Welding. D 20, Fan Fan, Power 40 Watts. The Floor Fan Has High Performance And Power, Silent Work. 3 Speed Mode Allows You To Choose The Optimal Mode Of Operation Depending On The Weather And Temperature In The Room. The Function Of Adjusting The Height And Inclination Allows You To Configure The Fan At The Desired Angle For Maximum Cooling. Thanks To The Rotation Function, The Axial Fan Provides Uniform Distribution Of Air Throughout The Room. Protection From Touching Rotating Blades. Durable Plastic And Stable Base. Small Weight And Compact Dimensions., Division Of 90 ° Polypropylene D 20 Mm, Fitting For Use During Installation And Repair Of Hot And Cold Water Supply Systems, As Well As Heating Of The Premises. Division 90 °, 20 Mm Du, Made Of Polypropylene. The Material Is Resistant To Moisture, Not Subject To Corrosion. Fitting Is Designed To Increase Temperature To +95 C And Maximum Operating Pressure 25 Bar Shows A Long Service Life. The Product Is Designed To Connect Two Pipes At An Angle Of 90 Degrees. Installation Is Carried Out Using Chipping Welding., Diamond Disc For 125 Mm Ushm Super -Thin, Continuous Cutting Circle For Use With Angular Grinding Machines (Ushm). The Super -Thin Disk Is Designed For Wet Cutting Of Tiles, Stone, Marble, Porcelain Tile. The Cutting Layer Consists Of Metal Powder And Synthetic Diamond Applied To The Steel Basis Using Cold Pressing. Thanks To The Continuous Application Of The Cutting Layer, The Sections Are Even And Clean, Without Chips And Cracks., Tee. The Transitional Polypropylene Transition 25/20/25 Mm, The Polypropylene Tee Is Used To Connect Three Sections Of Pipes Of Different Diameters During Installation Or Repair Of The Pipeline. It Is Used For Household Water Supply Systems And Low-Temperature Heating, As Well As For The Transportation Of Other Liquid And Gaseous Media, To Which Polypropylene Is Stable. It Is Mounted In Them By The Method Of Bell -Shaped Welding., Polu Underly Polyurethane Foam, 120X1000mm. Poluenia Polyurethane Foam 1000X120 Mm 20-5-100. It Is Designed To Process Large Surfaces And Allows You To Easily And Quickly Apply The Solution To The Wall. The Product Has A Rough Working Surface, Which Provides An Uniform Distribution Of Solution And Creates A Perfectly Smooth Surface. Thanks To This, Plaster Work Is Performed With High Accuracy And Quality. The Half Is Made Of Durable And Light Material - Polyurethane Foam. This Provides Durability And Convenience In Work. The Tool Is Equipped With A Comfortable Handle, Which Provides Comfortable Use And Allows You To Control The Movement Of A Half Terry. In Addition, A Half-Chorus Of A 1000X120 Mm Removalor 20-5-100 Can Be Used Not Only For Plastering, But Also For Grouting And Grinding Of Plastered Surfaces. This Allows You To Achieve A Perfectly Even And Smooth Finish.
