Tenders Are Invited For Delivery Of A Horizontal Tokarski Center With A Compatible Rod Feeder

3 Basic Data: • Maximum Turning Diameter - Up To At Least 300 Mm • Maximum Turning Length - Up To At Least 500Mm • Work Diameter Of The Rod - At Least 65 Mm • Handle Dimension (Main Spindle) At Least 8 /210Mm • Main Spindle Speed - At Least 4500 Rpm. Main - Not Less Than 12 Kw • Maximum Torque Of The Main Spindle - Not Less Than 130 Nm • The Diameter Of The Hole Through The Main Spindle - At Least 70 Mm • Tool Attachment Type - In The Bmt45 System • Tool Holder Mounted On At Least 4 Screws • Hydraulic Handle For The Main Spindle And For The Anti -Tone. With The Possibility Of Installing Powered Tools - Not Less Than 12 • The Number Of Tools In The Revolver - 24 (Half -Indexation), • Cutting Of The Knife Shaft - At Least 20X20 Mm • Clamp Sleeves Driven Tools Driven By Size - At Least Er20 • Maximum Power Of The Powered Tool Motor - At Least 4.8 Kw • Anti -Handed Handle Dimension - At Least 5 /135Mm. Anti-Tone- At Least 6000 Rpm • Fixed Power Of The Anti-Secreted Engine (S1)- Not Less Than 7 Kw • Maximum Anti-Tone Power- Not Less Than 10 Kw • Maximum Torque Of The Main Spindle- Not Less Than 50 Nm • The Diameter Of The Hole By The Anti-Reed- As At Least 40 Mm • Maximum Speed Of Rotational Tools- Not Less Than 6000 R/Min. ≤ 0.01Mm- Positioning Accuracy Axis With ≤ 0.02Mm- Positioning Accuracy Axis C ≤ 0.02 Degrees- Repeatability Of The Axis X ≤ 0.002Mm- Repeatability Of The Axis With ≤ 0.003Mm- Repetition Of The Axis C ≤ 0.006 Degrees • Sliding In The X Axis- No Less Than 200Mm In The X/Z Axis - Not Less Than 30/35 M/Min • Fast Rotation In The C Axis - Not Less Than 30 Rpm • Total Power Installed - Not More Than 34 Kva • The Level Of Noise Of The Devices Operation - Not More Than 85 Db2). Machine Tool Equipment: • Interception Spindle, • A Detail In Anti -Tone, • Internal Cooling For Anti -Rearrangea, • Min. 8 Solid Frames, • Min. 4 Frames For Powered Tools (2 Straight And 2 Angle) • 3-Jacket Hydraulic Handle At Least 210 Mm For The Main Spindle, • 3-Jacket Hydraulic Handle At Least 135 Mm For Anti-Reverse, • Coolant Sensor, • Control Detail Support Function, • Automatic Tool Recipient, • Automatic Tool Probe, Tape, • Hydraulic Unit, • Jaw Switch, • Closed Working Space With Lighting Installation, • Machine Operating Light Traffic Lights, • Oil Cleaning System From Oil, • High -Pressure Coolant Pump - At Least 7 Bar, • Preparation Of The Machine Tool For Connecting The Rod Feeder (Feeder Bar Interface), • Load Monitoring System, • Load Monitoring System Tools, • Built-In Network Card, • Usable Memory-At Least 2Gb, • Elements For Mounting The Machine To The Hall With Vibro-Insulating Feet, • Instructions For The Use And Programming Of The Machine Tool In Polish, • Anti-Shrink Transformer, • Technical And Movement Documentation, 3). Automatic Rod Feeder Fully Compatible With The Tokarski Center In Question*: • Length Of Operated Bars - 1.5 M, • The Range Of Supported Bars Diameters From Min. 5 Mm To At Least 65 Mm, • Load Capacity At The Diameter Of 6

Refer document

FileName	File Description
Global Tender Document	Tender Notice