Identification Badge With Cord Specification: Nominated Pvc Badge, With Alligator Timeline And 20Mm Wide Cord, In Fabric: Personalized Satin Polyester With The Logo Of The Óbidos City Council, Measurement: 5, 3 X 8, 5 Cm, Only Brazilian Flag: Brazilian Flag Made Of Nylon 1, 30 X 1 Fabric, 80 Special), With Stubs Reinforced Throughout The Lap, With Letters And Stars Embroidered On Both Faces. Produced In Accordance With Federal Law 5,700/71 And 8,421/92 And Their Amendments. For Internal Use, Pará State Parabandeira Flag Made Of Nylon 1 Fabric, With Letters Embroidered On Both Faces. For Internal Use, Flag Of The Municipality Of Obidosbandeira Of The Municipality Of Óbidos Made Of Nylon 1 Fabric, Mespecification Polo Shirt: Polo Shirt In Poly Viscose. Canelado Collar, 80 Mm Wide Neck, Reinforcement Of The Same Raw Material Should Be Applied For Finishing Purposes; Opening Of The Breast With 150 Mm Front Of The Right Side, With 35 Mm Transpass On The Same Side; Babing Made By Three Buttons Of Four Holes, 10 Mm In Diameter, With Houses In Size Of 12 Mm, Vertically. All Finishing Seams Should Be Done On The Overlock System. It Should Contain The Symbol Of The Óbidos City Council., 06/24/2025, Polo Shirt Tam Perspecification: Police Police Shirt. Canelado Collar, For Finishing Purposes; Opening Of The 150 Mm Front Of The Right Side On The Right Side, Pole Shirt Tam Gespecification: Polo Poly Viscose Shirt. Canelado Collar, Rectangular Stamp Great Specializations: Self -Entangled Stamp, Made With Structure In High Resistance Polymeric Material (Such As Abs Or Equivalent), With Internal Metallic Reinforcement For Greater Durability And Anatomical Cable, Suitable For Manual Use In An Administrative Environment. It Should Have A Print Area Of Approximately 8, 5 Cm Wide By 5, 5 Cm High, With Gently Rounded Corners. It Should Be Compared To 7 Text Lines, With Readable Source And Well Distributed. The Equipment Must Have An Internal Ink Recharge System. Graphic Art Will Be Provided By The Contracting Administration At The Time Of Acquisition., Rectangular Auto Auto -Entry Stamp With Anatomical Cable, Protective Lid And Inner Paint Recharge System. It Must Have A Print Area Of Approximately 6, 0 Cm Wide By 3, With Gently Rounded Corners. It Should Hold Up To 5 Text Lines, With Proportional Source And Clear And Uniform Printing. Graphic Art Will Be Provided By The Administration At The Time Of Hiring., Stamp Of A Single Word Compact Special Model: Self -Entangled Stamp, Made With High Resistance Polymeric Material (Abs Or Equivalent), With Protective Lid And Inner Paint Recharge System. It Should Have A Print Area Of Approximately 4, 0 Cm X 1, 0 Cm, With Single Word Centered On Upper Case, Printed Clearly. The Word To Be Inserted Will Be Defined By The Contracting Administration At The Time Of Acquisition., Personal Stamp Compact Modelpecifications: Auto -Entitled Stamp, With Body In High Resistance Polymeric Material (Abs Or Equivalent), Inner Ink Recharge System And Protective Lid. It Should Have A Print Area Of Approximately 2, 6 Cm Wide By 0, 9 Cm High, Allowing Up To 2 Lines Of Text. Graphic Art Will Be Provided By
