Low -Pressure Plastic Pipe (Pnd) With A Diameter Of 20 Mm To Protect Power And Low -Current Cables. The Supplier Is Obliged To Supply And Delivery Of The Pnd Pipe With A Diameter Of 20 Millimeters, Designed For Laying And Isolation Of Power And Low -Current Cables. The Total Supply Is 1000 (One Thousand) Linear Meters. Products Should Be Made By Extrusion From Primary Polyethylene Of High Hdpe Brand. The Pipe Is Designed For The Installation Of Cable Channels When Laying Power And Telecommunication Lines In The Ground, Under The Asphalt, In Buildings And Structures. It Can Be Used Both Indoors And Outside, Including The Conditions Of An Aggressive External Environment. The Main Characteristics Of The Products: External Diameter - 20 Mm, Inner Diameter - At Least 16–17 Mm, Wall Thickness - From 1.5 To 2 Mm (Depending On Sdr), Material - High -Density Polyethylene (Hdpe), Purpose - Protection Of Power And Low -Current Cables From Mechanical Damage And External Influences, Form Of Supply - In Bays At 50 Or 100 Meters, Color - Black, Black, Is Allowed. Marking Colored Strip. The Pipe Should Have High Mechanical Strength, Compression Resistance, Shock Loads And Punctures. The Minimum Bending Radius Is At Least 10 External Diameters. Stability To Ultraviolet Radiation Is High (When The Stabilizer Is Added). The Temperature Range Of Operation Is From -40 ° C To +60 ° C, The Installation Temperature Is Not Lower Than -15 ° C. The Protection Class In A Sealed Connection Is Ip67. The Products Should Be Chemically Resistant: Resistant To Aggressive Substances, Moisture, Acid, Alkalis And Soil Solutions. Compatibility With Cable Couplings, Fittings, Germans And Other Mounting Elements Is Required. The Supply Of The Customer At The Request Of The Customer Within 16 Calendar Days.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
