Bids Are Invited For Price Registration For Future And Eventual Acquisition Of Hydrometers, Connections And Seals To Meet The Needs Of The Municipal Secretariat Of Urban Infrastructure (Department Of Water And Sewage), For A Period Of 12 (Twelve) Months, As Requested By Request

Unijato Q3 1 1 1, 6 R80 Dn15 For Cold Water: - Inmetro 155/2022 Ordinance; - Range 80; - Length 115Mm; - 1/2 ”Nominal Diameter (Dn 15); - Nominal Flow - Q3 1, 6M³/H; - Maximum Flow - Q4 2 M³/H; - Detransição Flow - Q2 25, 6 L/H; - Minimum Flow - Q1 16 L/H; With Reading At 45 °; - Reloading Type (Ip68); - Reloadmills, With A Limiter; - Maximum Working Temperature 50 ° C; - Maximum Work Pressure 16 Bar - Serial Number Tag With Barcode Fixed On The Inner Side; Manufacture And Tests According To All Regulations/Ordinances In Force 155: 2022, Nbr 5426: 1985, Nbr 8194: 2015, Nbr Nm212: 1999; 15538/14 - Iso 9001: 2015 And Abnt Nbr/Iec 17025: 2017. ½ ” - Polypropylene Connections Kit Containing: 1 Short Tube, 1 Long Tube, 2 Necks With Metallic Insert And 2 Rubber Seal Stools In Black, For Installation In ½” Hydrometers - Reference Standard: Abnt Nbr 8194, Blue Polypropylene Type Anti -Fraud With Locks With 1/2 Lakes. Avoid Fraud In Hydrometer, Making It Impossible To Open The Nuts In Their Connections, Made Of 55 Kgf Resistant Polypropylene, With Non -Recycled Raw Materials; With Uva, Uvb And Uvc Protection Agent, To Ensure The Use For A Minimum Period Of 3 Years; Caps Should Have A Small Circular Hole Of Approximately 5 Mm In The Center To Avoid Water Retention And Dengue Proliferation; Materials Should Not Contain Burly, Color Variation, Injection And Other Non -Conformities;