Bids Are Invited For Acquisition Of Suv Automotive Vehicle, According To Senasp/Mjsp Agreement No. 00201/2023, To Meet The Needs Of The Raposa-Gmr Municipal Guard.

Technical Description Of Vehicle Suv: Classification For Operational Employment A - General - Vehicle For Ordinary Operational Employment, Siege And Routine Invesgative Diligences, Guaered By 1 (One) Or 2 (Two) Professionals. In The Public Security Activity, While Generally To The Land: Road/Urban A-1.Classification Of Type: Sport Ulity Vehicle (Suv). Minimum Compulsory General Technical Requisites- The Electrical System Should Be Compatible With The Requirement Of Public Safety Operational Activity, Considering The Simultaneous Functioning Of Complementary Acoustic Signaling Equipment, Light Signaling (Visual) And Interface With The Operations Center, With Operating Autonomy Of 06 (Six) Hours Considering The Luminous And Radiommunication Systems With The Engine Off And Sufficient Charging To Giving The Brown, Contemplating At Least Alternator And Battery (May Be Considered The Possibility Of Extra Battery Or Other Optimizing Solution), Electrical Whip, Fuse Box And Other Protection Devices Or Sized Switching For The Requested Energy Demand, Beyond Consider The Minimum Of Two Dollars In The Trunk And Two In The Cockpit, And A Minimum Of 4 Internal Lighting Points Over The Positions Of The Occupants And The Other Inside The Trunk When Applying The Provisional Finger Packaging System.- The Engine Of Cooking And Lubrication Of The Engine Must Be Compatible With The Requirement Of Public Safety Operational Activity, To Support Severe Conditions Of Use. Cooling And Lubrication, Should Be Compatible With The Requirement Of Puba Safety Operational Activity, Cell Compartment: Cell Adapted In The Rear Luggage Compartment, Endowed With Natural Lighting, Keeping The Original Sides And Rear Glasses, With Internal Steel-Perforated Plate Protection Of At Least 1, 2 Mm Thick, Adapted In The Trunk Compartment (Trunk). Steel Rivets Should Be Used. Floor Divuliment To The Ceiling (Separation Of The Rear Seat With The Luggage Compartment), Made Of Smooth Steel Slate, At The Bottom Slate And Perforated On Top, Allowing Ventilation, And Should Be Structured By Square Tubes With 20 Mm Side And At Least 1, Water Resistant; And Impacts Extending By Its Sides To Allow A Better Wash/Cleaning Of The Compartment, With The Flow Of Liquids Out Of The Vehicle, Through The Two Drains, Installed At The Rear Ends Of The Cell; Steel Door Attached To The Internal Coating, Structured By Square Tubes With 20 Mm Side And At Least 1, With Boring Bolt -Type Lock And With The Spotted Hinges, To Protect The Fifth Rear Door, To Protect The Fifth Rear Port, With Opening On The Side, From Left To Right, Any And All Access That May Exist Through The Arrested Compartment To The Rear Door Closure/Latch System Should Be Properly Blocked And If There Are Tools Or Accessories Located