Disposable Surgical Mask: Disposable Surgical Mask; In 100% Polypropylene, Melt Blow, Non -Allergic, With 4 Straps For Placement, Coated Nasal Clip; With Nasal Clip And Folds Horizontally; 3 Layers, Non -Toxic, Hypoallergenic, Fiberglass Free, Ultrasound, Non -Sterile Amendments; 1St Polypropylene Layer 20 G, 2Nd Layer Meltblow 20 G Filter, 3Rd Polypropylene 30 G Layer; With Filter Filter Of Bacterial Filtering Greater Than 96%; Packaging In Appropriate Material That Ensures Product Integrity; The Presentation Of The Product Must Obey Current Current Legislation; With Certificate Of Approval - C.A • Size/Weight: Standard • Specification: 50 Units Box, Scrape Host: Safety Host Made Of Scraping Leather, With Scrape Strips And Metal Buckles. In Gray Color. With Certificate Of Approval - C.A • Size/Weight: Standard • Specification: Pair, Welding Mask: Celeron Mask, Made With Articulated Display With Transparent Light Filter Fixed To The Fixed Display Through A Plastic Spring Fitted In Internal Slots Of The Display, The Rails Are Attached To Two Plastic Screws. With Certificate Of Approval - C.A • Size/ Weight: Standard • Specification: Unit, Respirator Painting Mask .C/ Filter Carbon Active: Respirator Painting Mask. C/ Filter Coal Active: Respirators Air Purifier Semifacial Piece, With Body Connections Dark Plasty Plastic Material In His Central Part And The Rest Of The Facial Part In Syntheral Elastmo, With Different Part Of The Size. On The Sides Of The Parts Of The Pieces, Two Plastic Devices Are Located, One On Each Side, Endowed, On Its Front, A Bayonet Fit And A Rubber Ring, Where The Chemical Filters, Combined And For Particles With Bayonet Fit Or The Fixing Base For Use Of Plane Particle Filters Are Fixed. At The Back Of Each Of The Devices, An Inhalation Valve Is Fixed. The Respirator Has, In Its Central Part, An Exhalation Valve. The Respirator May Or May Not Be Endowed With A Support Of Dark Gray Rigid Plastic Material, Fixed On The Front Of His Body Through Two Buttons And The Exhalation Valve Wrap, By Pressure Type Fit. This Support, Which Also Acts As A Coverage (Cover) Of The Exhalation Valve, Has Four Openings On Its Sides, Two Upper And Two Lower, Through Which The Ends Of Two Adjustable Elastic Rins, Which Slide Freely Inside. The Facial Part May Or May Not Have A Floating Tips System, Gifted At The Central Part Of A Fit That Acts As An Exhalation Valve Cover, Fixed To The Body Body Through Two Buttons And The Exhalation Valve Envelope By Pressure Type Fitting. At The Ends Of The Floating Ends, Four Plastic Clips Are Attached, Through Which The Ends Of Two Adjustable Elastic Strips Pass. The Tie Located At The Bottom Of The Part Has A Closing Buckle And The Tie Located At The Top, A Head Holder. The Respirator Is Used With The Following Filters: As Stated In The Notice., Kit Roçothe Class A And B Orange With Muffler And Facial Protector With Steel Mesh: Roceor Kit, Composed Of Helmet Injected In A Single Piece Of High Density Polyethylene, Plastic Suspension, Ju
