Direct Cable For The Brake Of The Bicycle. Quantity: Adjustable Angle - 2 Pcs, Direct Cable For The Brake Of The Bicycle. Quantity: Angle 90 -1 Pcs, Angle 110 -1 Pcs, The End Of The Brake Cable With A Diameter Of 1.5 Mm Is Universal, The Gas Car Gas Cable In A Shirt With Adjustment. Full Length: 2500 Mm. Shirt Length: 2370 Mm. Trose Material: Steel. Trick Diameter: 1.5 Mm. At The End Of The Cable, A Cylindrical Transverse Beaved Should Be Fixed With A Width Of 7 Mm And A Diameter Of 6 Mm. The Shell With A Thread: M6 X 1, The Fixing Nut In The Kit. Quantity: Cable In A Shirt - 2 Pcs, Tips For Squeezing On The Right Carving Cable. Material: Stainless Steel. Length: 86 Mm. Trick Diameter: 2 Mm. Thread: M5, The Gas Reducer Gas Cable, Without Braid. Full Length: 3000 Mm. Trose Material: Steel. Trick Diameter: 1.5 Mm. At One End Of The Cable, A Cylindrical Transverse Beavers Should Be Fixed With A 7 Mm Wide And A Diameter Of 6 Mm, Tip With A Welded Fork For Squeezing On A Cable. Material: Stainless Steel. Length: 86 Mm. Cable Diameter: 2 Mm, Tip Of The Cable Brake Brake Brake, Clip Aluminum Sleeve Din 3093 M1.5 For A Cable 1.5 Mm, A Steel Wicker Cable Covered With Lubricant And Placed In A Flexible Casing With A Polyurethane Shell. Trose Material: Steel Rope. Trick Diameter: 3 Mm. Shell Material: Stainless Tape, Antifriction Tube, Wires, Pgd Coating. The Diameter Of The Cable In The Shell: 11 Mm. At The Ends Of The Cable, Reinforcement (Membrane Tip) Should Be Fixed, Fixing The Position Of The Outer Casing, But Allowing Independent Movements Of The Core Inside It. The Tip Of The Shell With A Thread: M16 X 1.5, The Fixing Nut In The Kit. The Force Of Disruption Of The Liners: At Least 200 Kgf. The Length Of The Cable Tips: 60 Mm Each. The Force Of Breakdown Of The Cable Tips: At Least 450 Kgf. Tip Of A Cable With A Thread M6, Fixing A Nut In The Kit. Tros 1000 Mm Long - 1 Pc, A Cable Of 1500 Mm Long - 1 Pc, A Cable 2000 Mm Long - 1 Pcs, A Set Of Gas Cables. The Equivalent Of The Original Products: 17910-Mbw-D20 And 17920-Mbw-D20. Number: Cable - 2 Pcs, The Shirt Of The Brake Cable. Diameter: 5 Mm. Color: Black. Parameters: A Shirt In A Steel Spiral Shell Covered With A Plastic Braid. Compatibility: For Galvanized Cables, Cables With Teflon Coating And Stainless Steel Cables. Shirt 5 Meters Long, Tool For Squeezing A Cable. The Material Of The Cutting Edge: Stainless Steel 4Cr13. Squeezing: 0.1-0.5 Mm, 0.5-1.0 Mm, 1.0-2.0 Mm, 2.2 Mm, The Gas Car Gas Cable In A Shirt Without Adjustment. Full Length: 2500 Mm. Shirt Length: 2370 Mm. Trose Material: Steel. Trick Diameter: 1.5 Mm. At The End Of The Cable, A Cylindrical Transverse Beaved Should Be Fixed With A Width Of 7 Mm And A Diameter Of 6 Mm. Quantity: Cable In A Shirt - 2 Pcs
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.