Tenders Are Invited For Heating Works - Reconstruction Running Armatures On Systems Network Water And District Heating Installation And Construction Of Reinforcement Service Sites

Heating Works - Reconstruction Running Armatures On Systems Network Water And District Heating Installation And Construction Of Reinforcement Service Sites. The Subject Of The Contract Includes: 1. Design In One Phase - Work Project. The Main Purpose Of Designing Is: Designing Work Sites, Designing Boundaries For Dismantling Pipelines, Designing Boundaries For Installation Of Fittings, Designing Service Sites. In Determining Project Solutions, To Maximize Existing Devices And Equipment. Project Parts Should Be Developed Separately For Block 5 And 6 Blocks. 2. Delivery: 2.1. Wedbrake Available (For Positions 5.6Um10s10; 5.6Um20s10) Dy 600 - 4 Pcs. Additionally For The Fittings To Supply 4 Sets Of Spare Sunders, 4 Pcs. Lid Seals; 2.2. Valves Of Attachment- (For Positions 5.6Um10,20S98,99) Dy 50 - 8 Pcs. Additionally Supply 8 Pcs For The Lid; 2.3. Valves Of Attachment- (For Positions 5.6Um10,20S89,90) Dy 25 - 8 Pcs. Additionally Supply 8 Pcs For The Lid; 2.4. Dy 600 Available Water Service Places, Valves Attachment- Dy 50, Valves Attachment- Dy 25- 2 Pcs. 3. Dismantling. 3.1. Dismantling The Thermal Insulation Of The Existing Pipelines Ø630 X 8 Of Art. 3.2. Dismantling A Section Of Pipelines Ø630 X 8 From St. 4. Installation 4.1. The New Actuators (For Positions 5.6Um10s10; The Exact Location Of The Fittings To Be Determined At The Stage Of Work Design. -Columns (U-Kiii-Kol 5-1) Pos.43 Of Drawing №102-10686 Sheet 5, Node 1, Elevation 16,100, To Drawing №102-10684 For 5Eb. -Columns (W-Kxiii-Kol 19-22) Pos.43 Of Drawing №102-10867 Sheet 1, Elevation 16,100, To Drawing №102 10866 For 6Eb. 4.2. The New Valves (For Positions 5.6Um10,20S98,99) Dy 50 Should Be Mounted On A Tubular Tank, One Per Input And One In The Way Out Consistently And Serve To Drain The System. 4.3. The New Valves (For Positions 5.6Um10,20S89,90) Dy 25 Should Be Mounted On A Tubular Tank, One Per Input And One At The Exit Sequentially And Serve To Vent The System. 4.4. The New Sites Should Be Installed On A Pipe Tray Of 16,100, On 5 And 6Eb And To Serve As Dismantling, Installation And Service Of Fittings. The Accurate Place Of Installation Of The Sites And The Size To Be Determined At The Stage Design Stage. In Addition To The Sections Indicated In The Above Points, A Technical Specification Of The New Equipment, Instruction (Requirements) For Installation And Commissioning, A List Of Spare Parts For New Equipment And Fast -Wearing Parts, Program And Methodology, After Installation Inspections And Single Tests And Technology For Welding When Replacement Of Replacement Of Replacement Of Replacement Of Replacement Of Replacement Of Replacement Of Replacement. During The Project Implementation (Construction-M