Tenders Are Invited For Renovation Of The Pdps Laundry Building In Ostrowin

2. The Scope Of Work For The Technical Description Applies To The Scope Of Construction Works Intended To Be Carried Out As Part Of The Renovation Of The Laundry Building Located At The Pdps In Ostrowin. The Scope Includes Demolition, Plastering, Cladding Works, Replacement Of Construction Joinery, Performance Of A New Roofing, Modernization Of The Facade With Insulation, And Organization Of Scaffolding And Utilization Of Waste. Crafting Of Construction Works1) Demolition Works - Roofing Works) Demolition Of Existing Roofing From Roofing (Two Layers) On An Area Of ​​Approx. 427 M².B) Disassembly Of Steel Gutters And Trigger Pipes Made Of Galvanized Sheet. (Gutters About 55 M, Pipes About 20 M) C) Disassembly Of Flashing Of Fire Walls, Hoods And Other Roofing Details (About 84 M2) .D) Removal Of Elements Of Lightning Protection Installation: Cables, Distance Brackets. 2) Plastering And Internal Cladding Works) Supplementing Cement-Lime Plasters Category Iii On Walls And Poles In Traditional Technology. Glue. 3) Replacement Of Construction Joinery) Disassembly And Installation Of Pvc Or Aluminum Complex Windows In Existing Holes, Adapted To Thermal Parameters And Fire Protection Requirements. U = 0.9 W/M2k (Approximately 48 M2) B) Replacement Of External Doors With New Insulated Steel Doors With Adequate Usable Resistance. U = 1.3 W/M2k (Approx. 20 M2) C) Replacement Of Interior Doors With New Panels With Wooden Frames, Adapted To The Operational Conditions Of The Laundry. (Approx, 50 M2) 4) Roofing And Sheet Metal Processing) Making A New Cover Of Thermosal Felt - Two -Layer System: Undercoat And Surface Roofing. (Approx. 427 M²) B) Performing New Flashings Made Of Galvanized Sheet (Sedry, Hood Belt, Wall Machining, Fireproofs). (Approx. 55 M) C) Installation Of Roof Gutters And Drain Pipes Made Of Prefabricated Galvanized Steel Elements. (Approx. 25 M) 5) Facade Works-Insulation And Finishing) Cleansing Facade Surfaces From Painting Coatings By High Pressure Method. B) Supplementing External Cement-Lime Plasters. C) Insulation Of External Walls With An Etics System Made Of Polystyrene Boards 15 Cm; Insulation Of The Jam - The Plate 5 Cm. (U ≤ 0.20 W/M² · K) D) Making Reinforced Layers, Protective Corners, Pinning, Plastering With Silicone Thin -Layer Plaster. (Approx. 350 M²) E) Manual Painting Of The Facade With Silicone Paint In The Selected Colors According To The Design Of The Facade Colors. (Approx. 350 M²) 6) Auxiliary Works - Scaffolding: Assembly And Disassembly Of External Pipe Scaffolds With A Working Height Up To 12 M, Necessary To Perform Facade And Roofing Works. The Volume Of Waste Was Estimated On The Basis Of Demolition Surfaces And Exchange Of Joinery - A Total Of Approx. 18.36 M³.8) Final Attention) The Materials Used To Perform Works Should Have Relevant Technical Approvals And Declarations Of Compliance. Construction Works Must Be Carried Out In Accordance With: A) Tender Documentation, B) Applicable Regulations, C) Standards