Bids Are Invited For Acquisition Of Chairs For The Protocol Sector And Department Of Internal Controllership.

Swivel Chair - Specification: High Backrest, In Synthetic Fabric, 18 Mm Thick Multilamate Compensated, Double Seams In The Vertical Direction. Expanded Foam With An Average Thickness Of Approximately 45/15 Mm And Average Density Of 28 Kg/M³. Sae 1050 Steel Support With 76, 20 Mm Wide, 6, 35 Mm Thickness With Rounded Edges. 18 Mm -Thick Multilaminate Anatomical Seat, Depth Adjusting In Six Stages, Totaling 50 Mm Of Course, Round -Shaped Front, Expanded Foam With An Average Thickness Of Approximately 40/20 Mm And Density Of 33 Kg/M³ And 28 Kg/M³ Respectively, With Double Seams In The Vertical Direction. Supports Adjustable Arms With 06 Adjustment Possibilities, Made Of Injected Polyurethane, Height Adjustment, Horizontal Turn, Side And Front Displacement, Injected Polyamide Structure, With Injected Fiber And Aluminum Reinforcement, With 06 Height Adjustment Positions, And 60 Mm Of Course, Measuring 265X105mm.Base In Polished Aluminum, With Spider Aluminum Of 05 Stems, 65 Mm Casters In Black Color, Gas Height Adjustment System, Synchronized Mechanism, Allowing Independent Movements, And Locking In 03 Relax Positions, Or Free Movement, Through 02 Distinct Levers And A Handle For Total Mechanism, With 65 Polyurethane Finishing With 65 Touches With The Depth Regulation Of The Depth Of The Seat At 6 Stages, Bringing Ergonomics To The User. Approximate Measures Of The Product: Total Chair Width: 700-810 Mm, Total Chair Height: 1035-1150 Mm, Total Depth Of The Chair: 735-925 Mm. Seat Surface Depth: 490 Mm, Seat Width: 520 Mm, Seat Height: 485-600 Mm, Vertical Leakage Extension: 555 Mm, Backrest Width: 520 Mm. Maximum Variation Of 5% In Measures For More Or Less., Rotating Chair With Arms, Type President - Specification: Complete Chair: Width, 700Mm; Depth, 750Mm; Height, 880 To 1080Mm (Adjustable). Backrest: Width 430 X Height 450 Mm, Seat: Width 470 X Depth 450 Mm, Chair Made According To The Rules For Manufacturing And Ergonomics, With Mechanism Shaped In Steel Body, With Seat Fixation Plate Made Of Stamped Steel Plate, Free Of Moving, With A Fixed Tilt Of -3 ° (Minus Three Degrees). Resting Height Fixation And Adjustment System Consisting Of Metallic Tube, With Steel Plate Fixed By The Mig Welding Process, For Anchoring The Wood That Makes Up The Backrest, Using Screws. Height Adjustment With A Total Course Of 80Mm, With Nine Distinct Positions, Being The Backrest Elevation Movement Manually, By Vertical Turnstile With Steel Spring And End Of Course With Free Return. Polypropylene -Injected Handle -Injected Backrest Tilt System, Located Below And Laterally To The Seat, Consisting Of Alternated Stamped Steel Blades, Allowing Rotation Around Metallic Axle, Providing The 18 ° Angle Slope (Eighteen Degrees) With Any Position In This Angular Interval, As Needed By The User. The Return Of The Backrest Is Made Through Helical Metal Springs. Seat Made Of Multilaminated Compensated Wood, With Wooden Blades From Reforestation, Interspersed With Each Other, Resinad