Bids Are Invited For Acquisition Of New Equipment To Equip Vehicle Owned By The Municipality Used To Remove/Transport Patients For Treatment In Reference Centers.

Equipment. - Transport Pulmonary Fan, With The Following Mini-Technical Characteristics: Microprocessed, Cycled In Time With Volume And Pressure Ventilation Modes, Should Have Pre-Oxygenation Or Oxygen Inhalation System For Adult And Pediatric Patients For Use In Emergency Services, Patient Removal In Intra-Hospital, Inter-Hospital Transport; Should Be Able To Ventilate Only With Oxygen Source Connection; It Should Maintain The Last Parameter Setting, Have A Display With At Least 6, 5 Inch, Colorful Display, With The Simultaneous Presentation Of The Pressure And Flow Curves And The Possibility Of Capnography Curve, Exhaled Tidal Volume Visualization, Oxygen Concentration, Oxygen Concentration; Alarms Occurred (Sound; Visual And Colorful, Divided Into Priority), Battery Charge And Apnea Alarm; Minimum Adjustments: Peep, Maximum Pressure, Tidal Volume, Ratio I: And Or Time Inspiratory And O2 Concentration; Minimum Current Volume From 55 To 1950Ml; Minimum Ventilation Pressure Of 15 To 55 Mbar Or Cmh2o; Peep Minimum From 0 To 20 Mbar Or Or Cmh2o, Minimum Ratio I: And 1: 5/4: 1; Minimum O2 Concentration From 45% To 100%; Maximum Flow That The Equipment Should Reach At Least 145 Liters Per Minute; Sensitivity To Reusable Permanent Flow Sensor; Battery Autonomy Of At Least 3 Hours With Easy Access To Replacement Without The Need For Tools; 100-240V Ac Power Supply 50-60Hz; Mandatory Ventilatory Modes: Pcv; Ippv; Cpap + Asb, Simv, Bilevel And Vni (Noninvasive Ventilation); It Should Have A Pre-Adjustment Function Of The Equipment With An Initial Ventilation For Adult And Pediatric Patients; Operating Self-Test Function For Greater User And Patient Safety; 100% Oxygen Access Key For Emergencies. Accessories: 02 Adult/ Pediatric Patients; 01 Power Cable With Standard Abnt Connection; 01 Ambulance Fixation Support And Equipment. - Cardioverter Monitor/Biphasic Defibrillator With Dea, Step And Printer Brand. Minimum General Specifications: Electric: • Ac: 100 To 240 Vac, 50/60 Hz (Automatic Selection). Or A Minimum Of 140 Shocks In 360 Joules Or A Minimum Of 200 Shocks In 200 Joules. • Full Battery Charge Time (Completely Unloaded): 4:30 Hours. 150 Patients • Storage: 15 Seconds Of Ecg When In Shock, Physiological Alarm And Panel Events • Ecg: 2 Continuous Hours Of The Ecg Curve, When In Dea.Ctr Mode-Checking In Real Time (Available With Li-Ion Optional Battery): • Self-Diagnosis Of Defibrillation, Battery Level, Connected Paddles And Verification Of The Connection To The Electrical Network. Check Performed At 3 Pre-Configured Times. Transmission Of This Information, Wirelessly, For Pc With Ctr System Software Installed And Within The Reach Of The Network. Specifications Ambientistmpecatura: • Operational: 0 To 50 ° C. • Storage: -20 To 50 ° C.Muit: • Operational: 10 To 95% Rh, Without Condensation. • Storage: 10 To 95% Hr, Without Condensation. Protection Index: Ipx1. Wave Defibrillator: • Trunchanial Biphasic Exponential. Waveform Parameters Adjusted According To The Patients Impedance.