Tenders Are Invited For Purchase Of 1100 Liter Metal Garbage Containers. 1100 Liter Metal Garbage Container With Plastic Lid - 61 Pieces Container Length: 1370±10 Mm. Container Height: 1320-1500 Mm. Container Width With Closed Lid: 950 1100 Mm. Container Volume: 1100 L. The Container Must Fit Existing Garbage Truck Special Vehicles The Container Must Have Ears On The Sides Compatible With The Standard Garbage Truck Unloading System, Which Must Be Located 1000-1100 Mm Above The Ground. The Bottom/Base Of The Container Must Be Welded To The Body With A Continuous Line. The Welding Line Must Start From The Bottom/Part Of The Container, At A Height Of At Least 45 Mm. The Container Must Have 6-8 Mm Pressed-In Brackets To Prevent Deformation Of The Surfaces As A Result Of The Impact Of Handling And Lifting Equipment. The Thickness Of The Steel From Which The Container Is Made Must Be At Least 1.25 Mm On All Four Sides Of The Body, And At Least 1.5 Mm At The Bottom. The Container Must Have Corner Reinforcements Made Of At Least 2 Mm Steel. The Container Must Have Recesses To Prevent Deformation Of The Surfaces As A Result Of The Impact Of Handling And Lifting Equipment. The Container Must Be Welded In A Complete And Continuous Line (By A Certified Welder). The Bottom Of The Container Must Be Manufactured From A Deep Pressed Single Piece, Without Welding. The Bottom Of The Container Must Be Equipped With A Plug For A Circular Hole (Not Less Than 40 Mm). The Container Must Be Equipped With 4 Handles. The Sheet Metal Used Must Be Cold-Pressed In Accordance With The Requirements Of The En 10204: 2004 Standard. The Corrosion Resistance Of The Container Must Be Ensured By Hot-Dip Galvanizing In Accordance With The En Iso 1461 Standard. The Container Must Be Manufactured In Accordance With The Requirements Of The En840 Standard. The Container Must Have 4 Freely Rotating Metal-Core Rubber Wheels On Bearings Around Its Axis, Two Of Which Must Be Braked - With A Diameter Of 200 Mm, Maximum Load On The Wheel Not Less Than 200 Kg. The Container Lid Must Be Plastic, Easily Replaceable, Manufactured By The Rotational Method. Bids Accepted From: 18.06.2025 00:00 Procurement Type: Electronic Tender Without Reverse Auction(Nat) Deadline For Bid Submission: 20.06.2025 12:00 Bid Reduction Step: 400.00 Gel Guarantee Amount: 1`000 Gel Guarantee Validity Period: 160 Day [Disclaimer: The Above Text Is Machine Translated. For Accurate Information Kindly Refer The Original Document.] Tender Link : Https://Tenders.Procurement.Gov.Ge/Public/?Go=634174&Lang=En
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
