Tenders Are Invited For Modernization Of The Village Culture Center In Domanice As Part Of The Mazowsze Support Program For Local Integration Centers 2025 - Third Proceedings

1. To Perform The Modernization Of The Rooms In Question, A Number Of Construction And Installation Works Should Be Carried Out, And In Particular The Following: 1) Extend The Scene By 0.8M In The Form Of An Individual Impregnated Carpentry Sub-Structure Based On Posts, Frames And Crosses Anchored To The Ground, Side Walls Of The Room And The Scene. The Whole Upholstered In The Full Of Impregnated Boards. 32 Mm And Osb Board Gr. 22Mm And Finished On Top With A Flocked Liner And The Front With Wooden Paneling Varnished With A Width Of The Slats About 6Cm. The Final Solution To The Extending Of The Stage Is Left To The Contractor; 2) Make New Wall Bipolar Input Stairs To The Stage. Carpentry Stairs On Cheek Beams - 5X 16 Cm High And 30 Cm Wide. Protect The Stairs With A Wooden Wall Balustrade; 3) Perform A Renovation Of The Floor In The Auditorium By: A) Scraping The Parquet, B) Putting The Parquet With Putty To The Dance Floor And Mechanical Dust Removal After Grinding, C) Priming With Undercoat, Colorless Varnish, D) Smoothing The Surface With Abrasive Paper And Thorough Dust Removal With The Lasts Plinths, E) Painting The Dance Floor With Plinths With Plinths (E.G. Artitel Professional W430 Or Equivalent), F) Three Times Painting The Parquet With Plugs With Plinth Preparation For Varnished Floors; 4) Replace In The Entrance And Entrance Threshold Of The Side Door Stoneware Tiles For Large -Format Stoneware Tiles; 5) Perform The Installation Of A 2 -Meter Ceiling Rail On Curtains Along With The Housing Construction /Masking Of The Gk Rail On A System Subcontract - Dimensions. 60Cm In Height And 20Cm Wide, Including 8Cm, Horizontally; 6) Replace The Existing Ventilation Grid In The Gk Ceiling With Stainless Steel Grid; 7) Perform The Dance Floor On The Stage With The Spanning Of The Parquet With Mass To The Parquet Parquet, Mechanical Dust Removal After Grinding And Laying On Such A Prepared System. Theatrical Together With Dismantling Of Plinth Slats Cleaning Them And Painting And Re -Assembly After Installation Of The Floor Covering; 8) Liquidate The Ceiling Hatch In The Stage By Making A Sir From Wooden Joists, E.G. 5X16cm Every 50Cm, Covered With A Full 32Mm Board And A 22Mm Osb Plate, Under The Lintel Of The Stage By Building A Double -Layer Gk On A Systemic Frame Made Of Reinforced Profiles, E.G. Ultrasil Or Other Equivalent; 10) Installation Of A New Curtain With Electric Folding/Folding Together With Subconsuming And Supplying Power Supply According To The Guidelines Of The Curtain Manufacturer; 11) Dismantling Of The Existing 8 Pcs. Wall; 12) Disassembly From The Ceiling Of The Auditorium Of Existing 8 Ceiling Luminaires Such As Ceiling And Assembly Of New 3 Decorative Chandeliers; 13) Replace The Existing Electrical Installation Equipment Such As: Wall Connectors And Plug Sockets; 14) Make A Power Supply For Chandeliers And Supply For Curtain And Projection Screen In The Cover Of Cover Performing Installation Outlets Directly Via Gk; 15)