The Subject Of The Contract Is The Performance Of Specially Designed According To The Iwc Pan Project For Spring Springs For Amonotermlane High Pressure Devices (Autoclaw) A-12. The Springs Will Be Made By The Contractor From The Special And Certified Material Inconel 718/Alloy718 Based On The Prepared Technical Documentation Iwc Pan And Individual Technical Requirements Of The Employer. The Made Disc Springs Will Be Subjected To Endurance Tests Based On Specific Technical Requirements Shifted In The Technical Documentation. The Subject Of The Proceedings In The Next Stage Will Be Completed In 4 Artistic Sets Constituting The So -Called Spring Pulls As Structural And Tongue Elements Of The A-12 Autoclave Closure. The Discs Are Characterized By The Following Parameters: 3.1. Technical Parameters And Requirements For Making Disc Springs: 3.1.1. Dimensions Of The Disc Springs Given In The Attached Technical Drawing No. A-12-2/Iwcpan/0-2: Disc Springs With The Dimension Fi200 X Fi102x14x 18.2 Mm. 3.1.2. Material Of Discs Of Plate Springs. Execution From Inconel 718/Alloy718 In Accordance With The Attached Technical Drawing No. A-12-2/Iwcpan/0-2.3.1.3. Technical Requirements: 3.1.3.1. The Deflection Test Performed For The 1St Set Of 4 Springs Each And In Addition All Springs Must Be Subjected To The Deflection Test Individually (Individually). Testy Of The Spring Deflection Required As The Power/Droga Chart (Kraft/Lange). Imaging For The 4 Pcs. Spring Set In The Attached Technical Drawing No. A-12-2/Iwcpan/Gam. Package With A Bend Of 6.3 Mm - About 56,000 Kg. Requirements For A Single Plate Spring Served On The Attached Technical Drawing No. A-12-2/Iwcpan/0-2 And Specified: Minimum Load Of Bent Springs 3,15 Mm-28,000 Kg (L1 = 15.05 Mm). Youngas Module At A Temperature At 20 ° C Is 200,000 Mpa. 3.1.3.2. All Springs Must Be Marked And Numbered Permanently. The Numbers And Results Of The Tests Must Be Placed In The Test Certificate. 3.1.4. The Number Of Springs To Be Made: 20 Pcs.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
