Bids Are Invited For Acquisition Of Electrical Materials For Use In The Maintenance Of Public Lighting Networks Of The Municipality Of Irapuru/Sp, According To The Specifications And Quantities Provided For In The Term Of Reference.
Bids Are Invited For Acquisition Of Electrical Materials For Use In The Maintenance Of Public Lighting Networks Of The Municipality Of Irapuru/Sp, According To The Specifications And Quantities Provided For In The Term Of Reference.
Remember Base With Iron -Based Metallic Support And Pvc Socket. Support: Power Voltage: 100 To 305 V; Frequency: 50 /60 Hz; Nominal Current: 10 A; Support: 2 Mm Thickness And Fire Galvanized; Allows 360 ° Turn To Correct Relay Guidance; Product Material: Polypropylene Socket With Uv Protection, Tinned Brass Contact Terminals United By Tin Welding; 3 Wires Connection: Phase 1 (Black), Neutral Or Phase 2 (White) And Load (Red) Cross Section Of 1, 5 Mm² Conductors And 30 Cm Length; Interchangeable With Relays From Other Manufacturers; Dielectric Stiffness: 2,500 V; Indelible Marking Map With Identification Of Relay Fitting And Identification Of Fitting Terminals, Arm In A Gale To Public Lighting, Without Curve, 48Mm X 2, 5M, For Fixing An External Luminaire, Hepr 2, 5Mm2 1Kv White Corfio. Conductor: Formed By Naked Copper Wires, Soft Temper And Class 4 Or 5 Stringing According To Abnt Nbr 280. Isolation: Hepr 90 ° C - High Module -Based Ethylene -Propelled Ethylene -Propelled Thermofix Compound. Coverage: Pvc/St2 90 ° C - Vinyl Polychloride Extruded Thermoplastic Compound. Reference Standard: Abnt Nbr 7286, 5Mm2 1Kv Black Corfio. Conductor: Formed By Naked Copper Wires, 2 -Way 220V Command Key ~ 50/60Hz; Fiberglass Reinforced Nylon Mounting Support With 360 ° Turning To The Ideal Switch Positioning; Carbon Steel Fixation Support, Fire Zincated; Magnetic Drive Through Contactor; Contacts: Na (Normally Open); Nominal Current: 30 A (Ac3); Number Of Poles: 2 (Two); Stock (Base) Embedded; Maximum Load Current X Load Type: Ac4/Ac5a = 12A - Inductive Load With Capacitor Corrected Power Factor And Discharge Lamps (Eg Sodium Vapor Lamps, Metallic Vapor, High Mercury Vapor And Low Pressure); Ac5b = 30A - Incandescent Lamps, 09/06/2025, Metal Connector For 1 Screw, Metal, Star Or Fixed Key Operation; Derivation 6-1/0, Perforating Connector -70. Itemer -Resistant Polymer Connector And U.V. Rays, The Insulator Made Of Electrolyte Copper With Tin Finish And Elastomer Rubbers. Main Driver: 10 - 95Mm²; Derivation Conductor: 1, 5 To 10Mm², Insulating Tape. Flexible Pvc Insulating Tape In Black With Anti-Flame Agent And Rubber-Based Adhesive. Used For Electrical Wire And Cable Insulation With Voltage Up To 750 Volts. Suitable For Use In Low Voltage Electrical Installations. 19Mm Wide X 0, 15Mm Thick. Roll With 20 Meters, 100W Sodium Vapor Lamp, Base E40, Lumin 8550 24.000H Flow, Color: 2000 K, 250 W Sodium Vapor Lamp, Lumin 1305 32.000H Flow, 70W Sodium Vapor Lamp, Base E27, Base Lighting Luminaire: E40. Maximum Power: 100W. Produced In Aluminum With Polyester Powder Electrostatic Painting. Maximum Voltage: 250V. Dimensions: Ø 120 X 82Mm, Modular Public Lamp 150 Watts - Led Chip Osram (Duris S8 G5) 190 Lm/W - Led Smd (Surface Mound Device) Mounted On Mcpcb Circuit Circuit Plate (Metal Clad Circuit Board) Aluminum (3 Led 50W Plate) - Measurements: 440 (C) X 270 (L) X 100 (A) Mm - Recommended Height: 10 To 11 Meters - Frequency/Current: 50/60 Hz - Led Luminous Flow: 28,500 Lumens - Average Effective Luminous Flow: 23,393 Lumens (+/- 5%), Modular Public Luminaire 80 Watts - C
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.