Tenders Are Invited For Modernization Of Two Sports Complexes My Playground - Orlik 2012 At 10 Wyspiańskiego St. And Kochanowskiego Street In Tarnobrzeg.

1) The Scope Of Modernization Of The Surface Of The Football Field. A. Replacement Of The Surface From Synthetic Grass On A Mineral Foundation From Aggregates Through: A) Dismantling Of Sports Devices - Goals; B) Installation Of New Goals Along With Replacement Of Network Meshes And Replacement Of Cables And Hooks On The Mesh; C) Disassembly And Utilization Of The Old Surface Of The Football Field; D) Improvement Of The Foundation, Leveling And Densbcked; New Pavement Of Artificial Grass; F) Pasting New Game Field Markings; G) Painting Posts; B. Synthetic Grass Surface With A Height Of 40 Mm To 50 Mm Should Meet The Following Parameters: A) Grass Type: Mix Of Monophilic Fibers Reinforced With A Core With Fibrilized Fiber, B) Monophilic Fiber Thickness - Min 300 Micronówc) Thickness Of Fibrilized Fiber - Min. 60 Micronówd) Weight Of The Fiber - Dtex - Min. 13,000E) Number Of Bundles - Min. 8,500 Pcs/M2f) Number Of Fibers - Min. 100,000 Pcs/M2g) Total Grass Weight - Min. 2,300 Gr/M2h) Water Permeability (For The System) - Min 500 Mm/Hi) Strength Of Glued Connection After Aging: - Min 75 N/100 Mmj) Bunning Torn Strength: - Min. 40 N Starts) Filling Grass: Grass Woven On A Flexible Foundation Filled With Quartz Sand And Recycling Epdm Granules In Accordance With The Guidelines Of A Synthetic Grass Manufacturer. The System Requires A Shock Pad Flexible Mat With Gr. Min. 12 Mm. The Offered Grass Should Be An Ecological Product, Which Is 100% Subject To Full Material Recycling, I.E. Grass Fibers And Bottom Made Of Pp/Pe.2 Compounds). Lighting Modernization Scope: A. Replacement Of The Transverse Lighting) Disassembly Of Existing Fertilizers For The Football Field; B) Installation Of Led Rays For The Football Pitch; C) Dismantling Of Existing Highlighters For The Multifunctional Pitch; D) Installation Of Led Iron Lighting For The Multifunctional Pitch. The Modernization Of The Lighting Will Consist In The Replacement Of Halogen Fertilizers For Led.C. The New Lighting Must Meet The Requirements Specified In The Pn-En 12193 Light And Lighting-Lighting In Sport In The Range: A) Lighting Class Min. Ii; B) Medium Lighting Intensity Min 200 Lx; ​​.C) Uniformity Min 0.6; D. In Addition, The Lighting Luminaire Should Have: A) The Housing Made Of High -Pressure Aluminum Casting With A Toughened Glass Led Cover; B) The Degree Of Ip Tightness (Protection Against Moisture And Dust) - Min. Ip65; C) Ik Impact Resistance - Min. Ik08; D) Color Temperature Tc - 4000 K. E. The Cables In The Lighting Pole Should Be Replaced With The Base Of The Fuses. F. After Completing The Assembly Works, N.W. Measurements: A) Ground Resistance Measurement; B) Measurement Of Short Circuit Loop Resistance; C) Measuring Insulation Resistance; D) Measurements Of The Level Of Lighting In Order To Compare With Photometric Calculations.G. Modernization Of Electrical Switchgears By Replacing Excessive Current Switches, Switches, Contactors, Contact Slats And Cables. 3) Execution And Assembly Of