Tenders Are Invited For Task No. 1: A Construction Of Missing Lighting By The Road Kolbuszowa Górna - Kłapówka In Kłapówka Task No. 2: Construction Of Road Lighting In Werynia - Podlesie

The Subject Of The Contract Is The Implementation Of Construction Work On The Tasks Entitled: Task No. 1: The Addition Of Missing Lighting By The Road Kolbuszowa Górna - Kłapówka In The Town Of Kłapówkazania No. 2: Construction Of Road Lighting In Werynia - Podlesiei. Task No. 1: 1. The Construction Of The Lighting Covered By The Application Includes A Section Of The Overhead Network Powered From The Existing Lighting Pole 97 (According To Documentation 97/1 To 97/3), With A Length Of 108 (114) M. Made With The Asxsn 2X25 Mm2 Cable, Suspended On 3 Cuts With A Height Of 10.5 M, Erected Directly In The Ground Together With Urgent Plates. 2. On Columns 97 And 97/3, The Lightning Protection Should Be Mounted And Their Grounding ≤ 10 Ω Should Be Made. 3. Mount The Portable Earthing Set On The 97/3 Pole. 4 5. Road Led, Two -Chamber Luminaires With Factory -Installed Nema 5/7 Pin Sockets With Lighting Controllers. 6. The Lighting Control Must Be Compatible With The Existing System Used In The Kolbuszowa Commune. 7. Isc Sp. Z O.O., Ul. Krakowska 140A, 34-120 Andrychów. 8. Work In The Road Lane Should Be Reported To Zdp In Kolbuszowa, In Accordance With Decision No. 67/2023 Of 21.11.2023 Ii. Task No. 2: 1. In The Span Between Existing 46-47 Columns, An Additional 46/1 Pole Should Be Built, From Which The Lighting Network Section Will Be Moved On Newly Built-In 46/2 And 46/3 Type E-12 Columns, On Which The Asxsn 2X25 Mm2 Cable With A Length Of About 78 M And Led Lighting Will Be Suspended. 2 3. Słupe 51 Should Be Rebuilt Into A P-10.5/4.3 Verteborated Pole, On Which The Led Lighting Luminaire Will Be Built And On The Pole 47. 4. On The Built-In Pole 46/1, Hang The Lighting Transmission (In The Chest Should Be Installed 1-Phase Bay With Protection), In Accordance With The Conditions Of Connections No. 24-F2/Wp02847 Of 25.06.2024 On Columns On Poles 46/3 And 51 Should Be Installed Lightning Bristles With Grounding ≤ 10 Ω. 5. The As -Built Documentation Should Be Attached To The Intersection Of The Electrical Network With The Municipal Road. 6. In Addition, The Branches Should Be Cut On Trees Covering The Installed Luminaires And Remove Them On Your Own. Task No. 1 And 2 Should Be Reported To Pge Dystrybucja, Mielec Energy Region, And End With A Positive Receipt.Iv. Minimum Led Luminaire Requirements Applies To Task No. 1 And No. 2: 1) Led Luminaires With A Light Stream Min. 7140 Lm, Mounted On Tubular Booms Planted On A Rotated Poles. 2) Road Led, Two -Chamber Luminaires With Factory -Installed Nema 5/7 Pin Sockets With Lighting Controllers. 3) The Lighting Control Must Be Compatible With The Existing System Used In The Kolbuszowa Commune. 4) Isc Sp. Z O.O., Ul. Krakowska 140A, 34-120 Andrychów. 5) Two -Chamber Housing Made Of Pressure Aluminum Casting, Tempered Glass With A Self -Cleaning Coating, Resistant To Scratches6) Powder -Painted Body, With Electrostatic Coating, 7) Luminaire Made In The 2Nd Class Of Anti -Tire Protection8) The Luminaire Chamber And