Tenders Are Invited For Partial Repairs Of Bituminous Roads In The City And Commune Of Busko-Zdrój

1 Longitudinal, Removal Of Milling From Milling To The Contractors Component,- Arrangement Along With The Thickening Of The Mineral And Bullumic Mixture. 4 Cm- Sprinkling The Bottom Of The Defect And Lubricating The Walls With An Asphalt Emulsion, Closing The Contact Of The Surface Newly Made With The Surface Existing By Lubricating The Edge Of The Renovated Ripple With Flooding Mass And Backfilling With Broken Sand,- Sealing The Pavement Of The Surface By Widening The Gap With A Milling Machine, Cleaning The Space Between The Edges Of The Cracks And The Brushes Themselves Mechanical, Dry Edge, Priming And Filling The Rupture With Hot Flood And Covering With Small, Dusted, Hot Broken Sand,- Sealing Mesh Cracks In Asphalt Surfaces By Seating A Layer To A Depth Of About 3 Mm, Cleaning The Surface And Then Filling The Defect With An Emulsion Using A Renovter And Dusted, Hot Broken Sand,- Adjustment Of Sewage Wells On The Ring With Milling The Surface Around The Well, Reproducing The Loss Of The Loss Of The Well Around The Manhole Of The Well With Mineral And Bullumous Mass Along With Thickening, With A Width Around The Well Width 0.50 M. M. M. M. M. M. M. M. M. M. M. M. M. M. M. M. M. M. By Surface Consolidation Of Asphalt Emulsion And Grit. The Works Of The Works That Should Be Carried Out As Part Of Task No. 1:- Milling Of Bituminous Surfaces, 4 Cm With Removal Of Material At A Distance Of Up To 5 Km- 350 M2,- Add-On For Increasing The Milling Depth By 1 Cm Over 4 Cm- 350 M2,- Embedding Asphalt Mass (Defects Up To 4.0 Cm Deep) - 500 M2,- Supplement For Mass Built-In (Defects Above 4.0 Cm)- Each Subsequent 1.0 Cm Thick- 560 M2,- Repair Of Cracks Of Individual Asphalt Surfaces Using A Milling Machine- 35 M2,- Repair Of Asphalt Mesh Cracks- 350 M2,- Regulation Of Sewage Wells- 10 Breakthroughs (Consisting Of Removing The Existing Bituminous Surface And The Old Substrate To A Depth Of 30 Cm And Making A New Foundation From A Broken Fraction 0-63 Mm (Greek 30 Cm After Compaction) And A New Mineral And Asphalt Surface (2 Layers 4 Cm Each)- 35 M2. Up To 2.0 Cm- 1,000 M2,- Defects With A Depth Of 2.0 Cm To 4.0 Cm- 1 750 M2,- Defects Above 4.0 Cm- Each Subsequent 1.0 Cm Thick- 1,000 M2. The Ranges Of Individual Works Are Estimated, Determined On The Basis Of Partial Repairs Of Roads Carried Out In The Years. The Value Of The Offer Will Be Used To Compare Offers In The Price Criterion. Streets And Non -Urban Roads. Taking Into Account The Unit Prices Given In The Offer. The Protection And Marking Of The Works Of Works Is One Of The Contractors Duties. The Contractors Material Is A New Material For Which The Quality Certificate Has. 2.