Bids Are Invited For Acquisition Of Furniture, Appliances And Electronic And Peripheral Equipment

Type Office Chair: Upholstery Swivel; Reldar; Middle; Braços: Regular And Casters; Seat/Backrest: Damping And Regulator Mechanism; Structure: Steel Plate; Feet: Feet With Casters; Against Seat: 460Mm (Minimum Width) X460mm (Minimum Depth); Against Backrest: 400Mm (Minimum Width) X350mm (Minimum Vertical Extension); Adjustment: Gas System; Black Color., President Chair - With A 15 -Mm -Mm -Plywood Plywood Seat, Injected Laminated Foam, Both With 5/7 Courisimo Coating, Eco -Leather, Polypropylene Arm Or P.U Injected In Black, Relax Base That Allows The Slope Of The Back In Conjunction With The Height Adjustment By Means Of Piston Gas, Chrome Steel Star With Double Cashed Casters In Black Color., Office Table In L - With Fixed Drawer With Two Drawers And Snakes In Nylon; Approximate Measurements: A Table Of 1, 20M, A Table Of 0, 90M, Round Connection Without Foot And Total Height Of 75Cm; 15Mm Mdp Top With Gray Finish; Double Feet In Steel With Black Paint And Level Levels At Height. Color: Gray, Computers Table - Description: Work Module, Mdf Wood Material, Office Table 1, 80 X 0, 75 X 0, 74, 02 Drawers, Dimensions Connection 0, Dimensions Microcomputer Table 1, 00 X 0, 74. Retractable Tecloved Carrier, Melamine Laminate Coating, Type 90 Rounded Angular Connection, Base Table, Connection And Table Composition For Microcomputer. Color: Gray., Fixed Drawer - 3 Drawers, Nylon Roller Slips, With Simultaneous Key And Closure Of The Drawers, In Mdp, Embutidal Handle: L 0, 32 X P 0, 40 X 0, 34 M. Color: Gray. 04 Internal Shelves: Made Of Mdp Wooden Plate Stabilized 25 Mm For The Top And Other Parts With 18 Mm. Top Edges And Other Parts, Straight With Pvc 2, 0/0, 5Mm Thick Ribbon Finish Respectively In The Color And Default Of The Impact Resistance And Thermally Stable, Glued To The Wooden Substrate By The Hot Melt Process. Fixing System; Composed Of Drum Made Of Zamak 15 Mm Diameter, Fast Assembly Screw M6 Metric Thread In Zamak And Plastic Finishing Caps Made Of Polyethylene And 18 Mm Diameter. Drilling The Side Of The Side To Adjust The Shelves And Pin To Support With 5 Mm Diameter Made Of Plastic Material. Zamak Steel Hinges With 270 Angle Opening, Involuntary Removal Protection And Height Adjustment (+ 2 Mm / - 2 Mm). Key Switching System With Double -Sided Root Cover, 180º Rotation, 22 Mm Long Body Cylinder, 17Mm Diameter, Chrome Fixation Tabs And Finish. Seesaw Type, Fixed Inside, Left Door, Upper Side And Lower Right. Type Steel Bar Type Square 5/16 Section, 330Mm Long And Spacer Pins Made Of Steel Tube With Diameter And 5 Mm Height, With Epoxy Paint And Plain Finish And Fixed By M4 X 26Mm Metric Screws. Metallic Support Base. In Sae 1006 To 1008 Steel Tube, 30X50mm Rectangular Cross Section, Used Upright, With 03 Holes For Wiring With 35Mm Diameter, Located At The Back Of The Frame With Plastic Covers Inject