Request For Quotation Acquisition Of A System Of Materials Of Military Unit 01731

Seb Size: 50 Mm × 50 Mm Length: 6 Meters Wood Breed: Coniferous Rocks (Pine, Spruce) Type Of Processing: Rubberized, From Four Sides (Four -Circuit) Humidity: No More Than 22% Variety: 1St Or 2Nd (Without Rot, Blue, Lesions With A Fungus Or Insects) Surface: Non -Standing (On Demand - Strict) The Product Is New, Not Used Delivery Conditions: Delivery Is Carried Out In Accordance With The Volume And Terms Specified In The Contract Delivery At The Expense Of The Supplier To The Customer Warehouse Packaging: Stacks, With Gaskets For Ventilation Accompanying Documentation: Invoice, Invoice, Certificate Of Conformity Note: The Product Must Comply With The Requirements Of The Technical Regulations Of The Customs Union And Gost 8486-86 (Or Equivalent Regulatory Document)., Type: Welding Electrodes With Routine Coating Mark: Mr-3 Diameter: From 2.5 Mm To 5.0 Mm (Agree With The Customer) Length: From 300 Mm To 450 Mm (Depending On The Diameter, Coordinate With The Customer) Welding Mode: Dc (Dc) Or Alternating Current (Ac) Recommended Welding Current: Ø 2.5 Mm: 60–90 A Ø 3.0 Mm: 90–130 A Ø 4.0 Mm: 130–170 A Ø 5.0 Mm: 170–220 A Welding Position: In All Spatial Positions, Except Vertical From Top To Bottom Type Of Coating: Routine Save Performance: High Storage Conditions: In A Dry Room At A Temperature Not Lower Than +5 ° C Compliance With Standards: Gost 9466-75, Gost 9467-75 Or Similar Technical Conditions Packaging: Standard Factory Packs Of 5 Kg Or 20 Kg Boxes (Depending On The Supplier) Delivery Conditions: Electrodes Should Be New, Not Damp, Without Mechanical Damage Delivery Is Carried Out In Accordance With The Volume And Terms Specified In The Contract Delivery To The Customer’S Warehouse At The Expense Of Supplier Documentation: Invoice, Invoice, Passport Or Certificate Of Product Quality, Nails 120 Mm. The Thickness Is 4 Mm Roofs Of Roofing 120 Mm Long, With A Diameter (Thickness) Of 4 Mm, Are Designed For Attaching Roofing Materials (Metal Tiles, Corrugated, Wooden Crate And Other Roofing Elements) To Wooden Structures And Frames. Made Of Carbon Steel With A Protective Coating And Long -Term Operation In Conditions Of High Moisture And High Moisture And Increased Moisture Content And High -Moisture. Atmospheric Influences. The Nails Comply With The Requirements Of Gost 4028-63 “Construction Nails”, Gost 3282-74 And Gost 1759.0-87, As Well As The Technical Conditions Of The Manufacturer. Main Characteristics: - Type Of Product: Construction Roofing Nails - Length: 120 Mm - Diameter: 4 Mm - Material: Carbon Steel - Coating: Galvanized Or With Other Anti -Corrosion Coating (As Agreed) - Head Shape: Flat Or Semicircular - End: Pointed To Facilitate The Clogging And Minimizing Of The Split Of Wood - Application: Fastening Of Roofing Sheets, Wooden Crate, Lining Materials And Other Roof Elements - Packaging: In Boxes Or Bags That Ensure Safety During Transportation And Storage - Working Temperature: From −50 ° C To +80 ° C - Warranty Period: At Least 12 Months, Subject To Storage And Operation Conditions, Brackets Of 200 Mm Construction Bracket For Roofing Work, Length Of 200 Mm, A Diameter Of A Steel Rod 6 Mm. Designed For Fastening Elements Of Roofing Structures, Fixing Wooden And Metal Nodes, Mounting The Rafter Systems, As Well As Temporary Or Constant Fixation Of Building Materials During The Construction And Repair Of The Roof. It Is Made Of High -Strength Carbon Steel With Increased Steel Stability To Bending And Bending And Bending And Bending Loads. The Bracket Is Made In The Form Of A P-Shaped Steel Bar With Pointed Ends Or With A Cut For Installation In Dense Construction Bases. It Is Used In Wooden And Mixed Structures. Complies With The Requirements Of Gost 19766-74 “Fixed Construction Products. Construction Brackets ”, As Well As Gost 11473-75 And Gost 28778-90 In Terms Of Strength Requirements And Geometric Parameters. Main Characteristics: - Type Of Product: Construction Bracket For Roofing - Purpose: Fastening Of Rafters, Wooden Beams, Crate And Other Structural Elements Of The Roof - The Total Length Between The Ends: 200 Mm - Diameter (Thickness) Of Rod: 6 Mm - Material: Carbon Steel (Not Lower Than St3) -Form: P-Shaped (Symmetrical) - Surface: Without Covering Or Galvanized (As Agreed) - Ends: Pointed Or With A Notch Under The Clog - Method Of Production: Cold -Bent Or Hot -Stamped -Packaging: In Ligaments Or Boxes, With The Marking Of The Product And Manufacturer - Operating Conditions: For External And Internal Construction Work, At A Temperature Of −50 ° C To +60 ° C - Warranty: At Least 12 Months From The Date Of Delivery, Subject To Storage And Use Conditions, Seb Size: 50 Mm × 150 Mm Length: 6 Meters Wood Breed: Coniferous Rocks (Pine, Spruce) Type Of Processing: Rubberized, From Four Sides (Four -Circuit) Humidity: No More Than 22% Variety: 1St Or 2Nd (Without Rot, Blue, Lesions With A Fungus Or Insects) Surface: Non -Standing (On Demand - Strict) The Product Is New, Not Used Delivery Conditions: Delivery Is Carried Out In Accordance With The Volume And Terms Specified In The Contract Delivery At The Expense Of The Supplier To The Customer Warehouse Packaging: Stacks, With Gaskets For Ventilation Accompanying Documentation: Invoice, Invoice, Certificate Of Conformity Note: The Product Must Comply With The Requirements Of The Technical Regulations Of The Customs Union And Gost 8486-86 (Or Equivalent Regulatory Document)., Bour Along Concrete D.16 Mm. Diameter: 16 Mm Working Length: 600 Mm Total Length: 800 Mm Type Of Shank: Sds-Plus Spiral Design: 4-Way Spiral For Optimal Dust Removal Tips Shape: 4-Laping Cross Head For An Accurate Entrance Without Hooks Top Material: Coolpower Purpose: Drilling In Concrete, Reinforced Concrete, Brick, Stone Compatibility: Any Perforators With Sds-Plus Cartridge Compliance With Standards: Gost Iso 5468-2013, Internal Standards Of Quality Bosch Delivery Conditions: The Goods Are New, Original, In Proprietary Packaging Without Chips, Damage And Traces Of Corrosion Delivery On The Period Specified In The Contract Delivery To The Customer Warehouse At The Expense Of The Supplier Accompanying Documentation: Invoice, Invoice, If Any-Certificate Of Conformity Or Quality Passport From The Manufacturer, Type Of Profile: Equivalent Corner Shelves Size: 50 × 50 Mm Wall Thickness: 5 Mm Length: 12 M Material: Steel Is Structural Production Method: Hot -Rolled The Mass Of The Linear Meter (With A Thickness Of 5 Mm): ≈ 3.77 Kg Surface: Without Coating / Black (Without Galvanizing) Rental Accuracy: Ordinary (O), Increased (P)-According To Gost 8509-93 Connection Method: Welding, Bolt Connection Storage Conditions: In Covered Storage Rooms, On The Lining Gost: 8509-93, Technical Characteristics: Type: Self -Cutting Screw (Self -Tapping Screw) Length: 55 Mm Diameter: From 3.5 To 4.8 Mm (Specified When Ordering) Carving: Full, Self -Cutting Head: Secret Or Semicircular, Cross Slot (Ph/P) Material: Carbon Steel Coating: Phosphate (For Internal Work) Or Galvanized (For Protection Against Corrosion) Purpose: For Wood / Metal / Universal (Specified When Ordering) Standard: Meets The Requirements Of Gost, Din 7504, Iso Or Similar Technical Conditions Packaging: In Boxes Or Packages Of 500-1000 Pcs. (Depending On The Diameter And Type) Delivery Conditions: Delivery Is Carried Out In Accordance With The Volume And Terms Specified In The Contract Delivery To The Customer Warehouse At The Expense Of The Supplier The Goods Should Be New, Not In Use, Without Traces Of Corrosion Accompanying Documentation: Invoice, Invoice, If Available-Certificate Of Conformity, A Screwdriver Screw For Metal Screw-Samorer For Metal Is Designed To Fasten Metal Elements To Each Other And Other Materials (Including Thin-Leafy Metal, Profiles, Structures Made Of Steel And Aluminum) With Preliminary Or Without Preliminary Drilling. It Is Used In Construction, Finishing And Installation Operations. It Is Made Of Carbon Steel With Galvanic Anti-Corrosion Coating (Zinc). Main Characteristics: - Type Of Fastener: Metal Self -Tapping Screw - Diameter: 5.5 Mm - Length: 55 Mm - Type Of Head: Hexagonal - Type Of Thread: Rare With A Sharp End, Self -Cutting - Material: Carbon Steel - Coating: Galvanized (White Or Yellow Zinc, At Least 6 Microns) -Strength: Class Not Lower Than 5.8 To Gost 1759.4-87 -Compliance With Standards: Gost 1145-80, Gost 1146-80, Gost 27017-86, Iso 7049, Iso 15480 (If There Are Foreign Analogues) - Packaging: Box Or Plastic Packaging, Ensuring Safety During Transportation And Storage - Scope: For Metal Structures, Profiles, Sheet Metal, Thin -Walled Products And Roofing Elements - Operating Conditions: In The Temperature Range From −50 ° C To +80 ° C, With Corrosion Protection In Moderately Aggressive Media - Warranty: From The Manufacturer For At Least 12 Months, Subject To Storage And Operation Conditions, Disk Saw On Wood 255*32 Tooth 96 + Ring 30/32. A Saw On Wood 255 × 32 Mm, 96 Teeth, With A 30/32 Mm Transition Ring, Is Designed For Use On Stationary And Manual Circular Saws For Longitudinal And Transverse Sawing Of Wood And Wood Materials. Made Of High -Quality Tool Steel With Carbide Attacks On Cutting Teeth, Providing High Wear Resistance And Prolonged Service Life. The Disk Complies With The Requirements Of Gost 980-80 (Disk Saws For Longitudinal And Transverse Sawing Of Wood), As Well As Gost 26336-84 (Cutting Tool. Terms And Definitions), If Necessary, The Manufacturer’S Technical Conditions That Do Not Contradict These Standards. Main Characteristics: - External Diameter: 255 Mm - Landing Diameter: 32 Mm - Number Of Teeth: 96 Pcs - Body Thickness: At Least 2.0 Mm - Drank Width: At Least 2.8 Mm - Type Of Teeth: Alternating (Atb) Or Combined With A Positive Inclination Angle - Material Of Teeth: Carbide Attacks (Tungsten Carbide) - Maximum Rotation Frequency: At Least 6000 Rpm - Transition Ring In The Kit: With An External Diameter Of 32 Mm And Inner 30 Mm Additional Requirements: - The Disk Must Be Balanced, Not Have Deformations, Cracks And Other Mechanical Damage. - Marking On The Case: Diameter, Landing Hole, Number Of Teeth, Direction Of Rotation, Maximum Speed. - Packaging: Individual Protective Packaging, Ensuring Safety During Transportation And Storage. - Warranty From The Manufacturer: At Least 6 Months Subject To Operating Conditions., Type: Cutting Abrasive Disk External Diameter: 180 Mm Landing Diameter: 22.2 Mm Thickness: From 1.6 To 2.5 Mm (Specified By The Model) Material: Aluminum Or Corundure Oxide (For Metal), Silicon Carbide (For Stone) Purpose: For Cutting Metal / Steel (Specified When Ordering) Maximum Rotation Speed: At Least 8,500 Rpm Maximum Linear Speed: Up To 80 M/S Compliance With Security Standards: Gost 21963-2002, En 12413 Resistant To Overheating And Abrasion, Providing Even And Pure Cut Packaging: Factory, With Labeling (Name, Manufacturing Date, Shelf Life) Delivery Conditions: The Goods Should Be New, Not In Use Delivery Is Carried Out In Accordance With The Volume And Terms Specified In The Contract Delivery To The Customer Warehouse At The Expense Of The Supplier Accompanying Documentation: Invoice, Invoice, Certificate Of Conformity Or Product Passport Note: The Cut -Out Disk Must Correspond To The Technical Purpose And Be Suitable For Safe Use With Angle Grinders Of The Corresponding Class.