Tenders Are Invited For Chargers - Purchase Of Electrical Charger To Babolna

Chargers - Purchase Of Electrical Charger To Babolna. A Total Of 5 Electric Ac 22Kw Charging Connecting Points For The Purchase And Installation Of A Total Of 4 Electric Charging Equipment. One Single Filling Connection Accurate And One Double Charging Connection Accurate Electrical Charging Device Total 2 Pieces Of Electrical Charging Equipment 3 Pieces Of Charging Connection Point At Bábolna, Arany János U. 3. Installation Location. Two Simple Charging Connection Accurate Electrical Charging Equipment Total 2 Pcs Charging Connection Points At 2943 Bábolna, Toldi Miklós U. 26. At Both Installation Locations, 1 Minimum 10 Kwh Of Electric Storage Storage, Which Ensures Peak Loads And Efficient Use Of Renewable Energy Sources. And Integration Of Devices To The Scada Software Of The Energy Community Control And Accounting. The Entire System Must Be Controllable And Develop Data Communication For The Energy Community Platform Software Interface And For Smartboxes Used For Controlling The Energy Community. The Entire System Must Be Controllable And Develop Data Communication For The Energy Community Platform Software Interface And For Smartboxes Used For Controlling The Energy Community. Integration Is The Responsibility Of The Supplier. Determination Of Charging Equipment: • Quantity: 5 Filler Connection Points: (3 Babolna, Arany János U. 3, 2943, 2Pcs Bábolna, Toldi Miklós U. 26, 2943) • Type: Ac Charger • Maximum Power: 22 Kw In Controlled Form • Type 2 (Iec 62196) • Protection: Charging Cable Length: At Least 7M • Communication: Ocpp 1.6 Or Higher Protocol Support • User Identification: Rfid Id Card Reader And Mobile App Support • Display: Led Status To Display Charging Information • Overcurrent Protection: Built-In Small Breaker • Touch Protection: Type A. Timer Charging: The Equipment Should Be Able To Start Timed Charging Electric Storage • Capacity: Minimum 10 Kwh, Storage Capacity Adjusted To Energy Requirements That Ensures The Compensation Of Peak Loads And Efficient Use Of Renewable Energy Sources. • Power: At Least 10 Kw Charging And Discharge Power • Efficiency: Minimum 90% For Charging-Baking Cycle • Life Span: At Least 4000 Full Cycles Or 5 Years Warranty • Control: Integrate To The Scada System And Solar Inverter And Smartbox • Technology: Lfp-Based Energy Storage Solution That Provides Long Life And Low Maintenance Requirements. • Integration: Full Compatibility With Electrical Charging Equipment And Energy Community Control Software. General Requirements • Equipment Must Comply With Applicable Hungarian And Eu Standards And Regulations • After Installation