A Full -Pass Transformation -Free Ball Crane Diameter 20 Mm Or 3 4 Dumas With An Increased Resource Equipped With A Butterfly Handle With A Thickened Aluminum Alloy Wall Covered With Epoxy Dye. The Body Is Brass, Nickel. Assault Carving - Internal/Outer. This Model Can Be Used To Open/Close The Flow Of Cold (Drinking And Household) And Hot Water Supply, Heating Systems. It Is Permissible To Use In Pipelines With Compressed Air, Liquid Hydrocarbons, On Technological Pipelines That Conduct Liquids Neutral To Brass. The Amount Is 5 Pieces., Diaglative Combined Fitting Diameter 25 Mm. The Color Is White. It Is Used To Create A Connection Of A Polypropylene Pipeline With Pipes Or Reinforcement From Other Materials That Have A Threaded Connection. The Case Is Made Of Polypropylene, The Threaded Insert Is Brass, Has An Outer Thread. The Sealing Ring Is Made Of Synthetic Rubber. The Connection To The Polypropylene Pipe Is Carried Out By Polyfusion Welding. The Drive Is 8 Pieces., Division 90 ° For The Inner Sewage Diameter 50 Mm. Made Of Polypropylene. The Material Is Resistant To Corrosion, Durable, Durable, Resistant To The Temperature Of Constant Effluents Up To +80 S (Short -Term Up To + 95 S) And Aggressive Environments. Fiting Is Used In Places Of Changing The Direction Of The Pipeline. The Amount Of 8 Pieces., Polypropylene Diameter 25 Mm, 4M Long. The Color Is White. The Fiberglass Reinforced With Fiberglass Is Used In Water And Heating Systems, In Technological Pipelines With Media, Neutral To The Materials Of The Product And The Working Pressure Of Not More Than 20 Bar (6 Bar At A Stream Of 90 ° C). 28 Meters., Polypropylene Ball Crane Diameter 25 Mm. The Color Is White. Used To Open/Close The Flow In Tap Systems. It Is Installed In Systems With Polypropylene Pipes. Connection Method - Bell -Shaped Welding. The Handle Has A Marking For A Hot Water Supply Pipeline. The Amount Is 6 Pieces., Full -Pass Transitted Ball Crane With A Diameter Of 15 Mm Or 1 2 Dumas With An Enlarged Resource Equipped With A Butterfly Handle With A Thickened Aluminum Alloy Wall Covered With Epoxy Dye. The Body Is Brass, Nickel. Assault Carving - Internal/Outer. This Model Can Be Used To Open/Close The Flow Of Cold (Drinking And Household) And Hot Water Supply, Heating Systems. It Is Permissible To Use In Pipelines With Compressed Air, Liquid Hydrocarbons, On Technological Pipelines That Conduct Liquids Neutral To Brass. The Amount Is 20 Pieces., The Coupling For The Inner Sewage System With A Diameter Of 50 Mm. Made Of Polypropylene. The Material Is Resistant To Corrosion, Durable, Durable, Withstands The Temperature Of Constant Effluents Up To +80 S (Short -Term Up To + 95 S) And The Effect Of Aggressive Environments. Fiting Is Used To Connect Non -Structural Pipes During Installation And Repair Of Sewer Systems. The Amount Of 9 Pieces., The Tee Of Equivalent Diameter Is 25 Mm. The Color Is White. From Polypropylene Is Used To Create A Connection Of Three Sections Of Pipes During Installation Or Repair Of The Pipeline. It Is Used In Systems Made Of Polypropylene Pipes, Mounted In Them By Blank Welding. The Amount Is 6 Pieces., The Coupling Polypropylene Diameter 25 Mm Is Made Of High -Quality Material. The Color Is White. The Product Is Durable, Resistant To Corrosion, Shows A Long Service Life. It Withstands An Increase In Temperature To +95 C, Maximum Working Pressure Is 25 Bar. Designed To Connect Two Segments Of Polypropylene Pipes. Installation Is Carried Out By Trimming. The Amount Of 8 Pieces., Bilateral Angular Discharge Diameter 25 Mm. The Color Is White. Used To Change The Direction Of The Pipeline By 90 °. It Is Used In Systems Made Of Polypropylene Pipes, Mounted In Them By Blank Welding. The Amount Is 10 Pieces.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
